Abstract:This paper employs the Finite Element Method (FEM) to simulate and analyze the effects of corrosion defect parameters on the stress and failure pressure of pipelines. It investigates how the boundary conditions of the pipeline model influence stress and examines the sensitivity of failure pressure to corrosion defect parameters. A nonlinear regression equation has been developed from a dataset obtained through simulation experiments to predict the failure pressure of corroded pipelines. To validate the effects of corrosion defect parameters on failure pressure, a hydrostatic test platform for an API 5L X65 pipeline with corrosion defects was established to measure stress levels and failure pressures across varying corrosion defects. The study reveals that failure pressure is negatively correlated with corrosion length and depth, while positively correlated with corrosion width. Among these parameters, corrosion depth exerts a more significant influence on the pipeline's failure pressure than corrosion length and width. Within the range of corrosion defect parameters examined, the maximum deviation of the prediction equation's results from the simulation results is 8.71%, with an average deviation of 5.81%. The standard deviation of the fitted residuals is 0.01837. Additionally, the maximum deviation between the predicted results and experimental measurements is 8.39%, with an average deviation of 7.77%. The strong agreement between the predicted results from the equation and the actual measured data underscores the effectiveness of the nonlinear regression equation.

Collapse Capacity of Corroded Pipes under Combined Pressure, Longitudinal Force and Bending

Experimental and Numerical Analysis of the Impact of Corrosion on Pipeline Failure Pressure

Plastic Collapse Analysis of Thin-Walled Pipes Based on Unified Yield Criterion

Collapse of Corroded Pipelines under Combined Tension and External Pressure

Bending Capacity of Corroded Pipeline Subjected to Internal Pressure and Axial Loadings

Effect of the Y/T on the Burst Pressure for Corroded Pipelines with High Strength

On the Collapse Failure of Dented Pipes under Bending Moment and External Pressure

On Collapse Failure Analysis Of Subsea Corroded Sandwich Pipelines Under External Pressure

On Elastic-Plastic Collapse of Subsea Pipelines under External Hydrostatic Pressure and Denting Force

Double Circular Arc Model Based on Average Shear Stress Yield Criterion and Its Application in the Corroded Pipe Burst

Bending Moment Capacity of Pipes

Surface Stress Analysis of Internally Corroded Pipes under External Pressure

Limit bending moment for pipes with two circumferential flaws under combined internal pressure and bending

Collapse Loads for Circumferentially Through-Wall Cracked Pipes Subjected to Combined Torsion and Bending Moments

Bending failure of the corroded pipeline subjected to initial internal pressure and axial compressive force

Effect of Steel Properties on Buckling Pressure of Corroded Pipelines

Evaluating Fitness-for-Service of Corroded Metal Pipelines: Structural Reliability Bases

An analytical approach for assessing the collapse strength of an unbonded flexible pipe

Collapse Of Tubes Under Combined Bending And Axial Compression Loads

Prediction Method For Plastic Collapse Of Pipes Subjected To Combined Bending And Torsion Moments

Plastic Limit Load Analysis for Pressure Pipe with Incomplete Welding Defects Based on the Extended Net Section Collapse Criteria