Abstract:This paper presents an experimental and numerical investigation on the stability behaviour of cold-formed thick-walled steel tubes. Axial compression tests were conducted on 15 steel tubes with square and rectangle cross-sections to investigate their structural behaviours . The primary test parameters were slenderness and width-to-thickness ratios. Material properties , failure modes, load-deflection curves, and load-strain curves of the specimens are discussed. Furthermore, a numerical simulation was conducted to further investigate the effects of the slenderness ratio, width-to-thickness ratio, and initial geometric imperfection on the axial compression behaviour of cold-formed thick-walled tubes. Based on the experimental and numerical results, the applicability of the design codes, GB50018–2002, AISI S100–16, and EN 1993-1-1 was assessed. Results revealed that all three codes predicted the yield strength well after considering the cold-formed effect. With an increase in the slenderness ratio, GB50018–2002 and AISI S100–16 yielded increasingly unsafe predictions for overall stability, whereas EN 1993-1-1 yielded safe predictions. Finally, a modified design method for the overall buckling resistance of cold-formed thick-walled rectangular tubes under axial compression was proposed based on EN 1993-1-1 and verified using test and FEM results.

Mechanical behavior of thin tubes under combined axial compression and bending

Collapse Of Tubes Under Combined Bending And Axial Compression Loads

Experimental Investigation of Circular Steel Tubes with Tapered Ends Subjected to Bending,compression and Torsion

Buckling Response of Offshore Pipelines under Combined Tension and Bending

Buckling Response of Offshore Pipelines under Combined Tension, Bending, and External Pressure

Bending Strength of Thin-Walled Centrifugal Concrete-Filled Steel Tubes

Behavior of Thin-Walled Dodecagonal Section Double Skin Concrete-Filled Steel Tubes under Bending

EXPERIMENTAL STUDY ON CENTRIFUGAL CONCRETE-FILLED STEEL TUBES UNDER BENDING AND TORSION

Experimental Investigation And Design Of Concrete-Filled Cold-Formed Thin-Walled Steel Tubes Subject To Bending

Theoretical and Experimental Study on Load-Carrying Capacity of Combined Members Consisted of Inner and Sleeved Tubes

Experimental Investigation and Design of Thin- Walled Concrete-Filled Steel Tubes Subject to Bending

On the buckling of mechanically lined pipes under combined tension and bending

FLEXURAL BEHAVIOUR OF THIN-WALLED DODECAGONAL SECTION DOUBLE SKIN CONCRETE-FILLED STEEL TUBES

Seismic Behavior of Steel Tube Confined RC Columns under Compression-Bending-torsion Combined Load

Asymmetric buckling of offshore pipelines under combined tension, bending and external pressure

The research on the critical loading path of thick-walled pipes under external pressure and cyclic bending

Bending Collapse of Folded Tubes

An Analytical Study for Global Buckling of Circular Tubes under Axial and Oblique Compression

Bending collapse of square tubes with variable thickness

Experimental investigation on axial compression behaviour of cold-formed thick-walled steel tubes

The Research on the Different Loading Paths of Pipes under Combined External Pressure and Axial Tension