Abstract:The research on and application of electric fields to promote the rapid infiltration of ions into cement concrete have been widely explored. Still, there are few studies on the migration of sulfate ions using electric fields. In this paper, a new test method is designed using the principle of electric fields, that is, to accelerate the attack of sulfate into concrete under the action of the electric field, to test the resistance of concrete to sulfate attack. By testing different water–cement ratios, different pulse frequencies, different ages, and different soaking environments, the influence of the electric field on the sulfate resistance of concrete was analyzed. The results show that the compressive strength of concrete in a sulfate attack environment is smaller than that of conventional attack and water immersion environment when the water–cement ratio is 0.3, 0.4, and 0.5 under the action of the electric field and increases with the increase of water in the water–cement ratio. Compared with a 14 day test, the compressive strength of concrete in a sulfate attack environment decreased by 1.9%, 8.6%, and 2.9%, respectively, at 28 days, which was faster than that of conventional attack and water immersion. The compressive strength of the concrete in the sulfate attack environment during the full immersion test and the semi-immersion test is smaller than that of the conventional attack and water immersion, and the semi-immersion test method is more obvious than the full immersion test method. The microscopic morphology of the test group, the water group, and the solution group were compared. From the microscopic morphology comparison, it can be seen that the electric field accelerates the diffusion of sulfate ions into the cement concrete and accelerates the reaction of sulfate ions with the relevant components in the cement concrete. Given the demand for concrete to resist sulfate attack under the action of the electric field, developing new and efficient protective materials is an important research direction. At present, the market lacks protective materials specifically for such an attack environment. This paper provides the theoretical basis and technical support for improving the effectiveness of concrete surface protection technology and engineering practices.

Review of Sulfate Attack on Concrete

Mechanism and Performance Control Methods of Sulfate Attack on Concrete: A Review

Research on the Sulfate-resistant Chemical Attack Mechanism of Concrete with Mineral Admixture

Overview of Concrete Durability under Sulfate Attack and Multi-Factor Coupling Effects

Sulphate attack resistance of high-performance concrete under compressive loading

RESEARCH ON MECHANISM OF SULFATE ATTACK ON CONCRETE BY TG-DSC METHOD

Mechanical Properties and Damage Evolution of Concrete Materials Considering Sulfate Attack

Zero-Cement Concrete Resistance to External Sulfate Attack: A Critical Review and Future Needs

Modeling of Concrete Deterioration under External Sulfate Attack and Drying-Wetting Cycles: A Review

Study on the Resistance of Concrete to High-Concentration Sulfate Attack: A Case Study in Jinyan Bridge

Investigation of concrete exposed to dual sulfate attack

Reliability assessment of concrete under external sulfate attack

Damage Mechanism of Concrete Deteriorated by Sulfate Attack in Wet-Dry Cycle Environment

Study on the Attack of Concrete by External Sulfate under Electric Fields

Deterioration Mechanisms of Sulfate Attack on Concrete under Alternate Action

Investigation on durability of concrete exposed to chloride, sulfate attack and steel corrosion

A Chemical-Transport-Mechanics Numerical Model for Concrete under Sulfate Attack

Numerical assessment of external sulfate attack in concrete structures. A review

Effects of Sodium Sulfate Attack on Concrete Incorporated with Drying-Wetting Cycles

Experimental Investigation on the Effect of Sulfate Attack on Chloride Diffusivity of Cracked Concrete Subjected to Composite Solution

Experimental study on underground structure concrete under static bending loads and sulfate attack