Abstract:In order to study the durability of concrete materials subjected to sulfate attack, in a sulfate attack environment, a series of concrete tests considering different fly ash contents and erosion times were conducted. The mechanical properties and the micro-structure of concrete under sulfate attack were studied based on the following: uniaxial compressive strength test, split tensile test, ultrasonic impulse method, scanning electron microscopy (SEM) and X-ray diffraction (XRD). The mechanical properties were compressive strength, splitting tensile strength, and relative dynamic elastic modulus, respectively. Additionally, according to the damage mechanical theory, experimental results and micro-structure analysis, the damage evolution process of concrete under a sulfate attack environment were studied in detail. Finally, according to the sulfate attack time and fly ash content, a damage model of the sulfate attack of the binary surface was established. The specific results are as follows: under the action of sulfate attack, the change law of the rate of mass change, relative dynamic modulus of elasticity, corrosion resistance coefficient of compressive strength, and the corrosion resistance coefficient of the splitting tensile strength of concrete all increase first and then decrease. Under the same erosion time, concrete mixed with 10% fly ash content has the best sulfate resistance. Through data regression, the damage evolution equation of the sulfate attack was developed and there is an exponential function relationship among the different damage variables. The binary curved surface regression effect of the concrete damage and the erosion time and the amount of fly ash is significant, which can predict deterioration of concrete damage under sulfate attack. During the erosion time, the combined expansion of ettringite and gypsum caused micro cracks. With an increase of corrosion time, micro cracks developed and their numbers increased.

Experimental study on underground structure concrete under static bending loads and sulfate attack

Concrete Deterioration Mechanisms under Combined Sulfate Attack and Flexural Loading

Experimental study of the deterioration mechanism of concrete under sulfate attack in wet-dry cycles

Mechanical Properties and Damage Evolution of Concrete Materials Considering Sulfate Attack

Damage Mechanism of Concrete Deteriorated by Sulfate Attack in Wet-Dry Cycle Environment

Decay of fracture parameters of concrete under sulfate environments

Experimental Study on Double-K Fracture Parameters of Concrete Exposed to Sulfate Environment

Experimental Study on Chloride Ion Transport in Concrete Structure under Shear Stress

Damage Constitutive Model and Mechanical Performance Deterioration of Concrete under Sulfate Environment

Experimental investigation on the fracture properties of concrete under different exposure conditions

Deformation behaviour of concrete materials under the sulfate attack

Combined effects of sulfate attack under drying–wetting cycles and loading on the fatigue behavior of concrete

Reliability assessment of concrete under external sulfate attack

Study on the Resistance of Concrete to High-Concentration Sulfate Attack: A Case Study in Jinyan Bridge

Research on the performance evolution of concrete under the coupling effects of sulfate attack and carbonation

Study on the Deterioration of Concrete under Dry-Wet Cycle and Sulfate Attack

Degradation mechanisms of cast-in-situ concrete subjected to internal-external combined sulfate attack

Damage Evolution of Concrete under the Actions of Stray Current and Sulphate

A Chemical-Transport-Mechanics Numerical Model for Concrete under Sulfate Attack

Effect of Sulfate Concentration on Chloride Diffusion of Concrete under Cyclic Load

Degradation Mechanisms of Chloride Contaminated Cast-in-Situ Concrete Partially Exposed to Magnesium-Sulfate Combined Environment