Abstract:Monochromatic energy multilayer Kirkpatrick-Baez microscope is one of key diagnostic tools for researches on inertial confinement fusion. It is composed by two orthogonal concave spherical mirrors with small curvature and aperture, and produce the image of an object by collecting X-rays in each orthogonal direction, independently. Accurate measurement of radius of curvature of concave spherical mirrors is very important to achieve its design optical properties including imaging quality, optical throughput and energy resolution. However, it is difficult to measure the radius of curvature of spherical optical surfaces with small curvature and aperture by conventional methods, for the produced reflective intensity of glass is too low to correctly test. In this paper, we propose an improved measuring method of optical profiler to accomplish accurate measurement of radius of curvature of spherical optical surfaces with small curvature and aperture used in the monochromatic energy multilayer Kirkpatrick-Baez microscope. Firstly, we use a standard super-smooth optical flat to calibrate reference mirror before each experiment. Following, deviation of central position between measurement area and interference pattern is corrected by the theory of Newton's rings, and the zero-order fringe position is derived from the principle of interference in which surface roughness has minimum values in the position of zero light path difference. Measured results by optical profiler show the low relative errors and high repeatability. Eventually, an imaging experiment of monochromatic energy multilayer Kirkpatrick-Baez microscope determines the measurement accuracy of radius of curvature.

Measurement of Large Aperture Rough Sphere

A Measurement System for the Roughness of Ultra Smooth Surface with Large Aperture

Spectrophotometer for Measuring Spectral Transmittance and Reflectance of Large Aperture Optical Element

Fast measurement spherical surface and fast patching up aspherical surface

Aberration Calibration in High-Na Spherical Surfaces Measurement on Point Diffraction Interferometry

Research on Two Optical Methods for Aspheric Measurement

Spherical Aberration Compensation Method for Long Focal-Length Measurement Based on Talbot Interferometry

Roughness Characterization of Well-Polished Surfaces by Measurements of Light Scattering Distribution

Testing Large Curvature Surface of Optical Element with Spatial Carrier Heterodyne Interferometry

Measurement of Radius of Curvature of Spherical Optical Surfaces with Small Curvature and Aperture by Optical Profiler

Measurement Of Roughness Inside Aperture

Design and Characteristic Measurement of 8000 mm Large Aperture Integrating Sphere

Measuring Rough Optical Surfaces Using Scanning Long-Wave Optical Test System. 1. Principle And Implementation

Interferometric Measurement of the Radius of Curvature Based on Axial Displacement from a Confocal Position and Corresponding Defocus Wavefront

Absolute Measurement of Roughness and Lateral-Correlation Length of Random Surfaces by Use of the Simplified Model of Image-Speckle Contrast

Measurement of circular aperture diameter based on Fresnel diffraction

Air Flow Turbulence Orthogonality and Surface Error Estimation in Large Aperture Optical Testing

Analysis of Diffraction Spectra for Measuring Surface Form of Spheric and Rotationary Symmetric Aspheric Components

Testing big curvature surface of optical element with zernike polynomial fitting twice

Testing A Large Aspheric Surface Based on Analysis of Scanning 3d Interferogram

Study of ultra-precise rotary scanning measuring technique for large aspheric surface