Abstract:The absolute shape measurement of large aperture optical flats usually requires a standard mirror with the same or larger aperture as the element to be measured as the reference surface for calibration. However, the large aperture standard mirror is difficult to process, and the measurement resolution is limited. To solve this problem, a method of measuring the absolute surface shape of a large aperture optical flat is proposed. The aperture optical flat is divided into several sub-apertures using the sub-aperture stitching method. The reference mirror shape is obtained by the odd and even function four-step absolute measurement method and separated to obtain the absolute surface shape of the sub-aperture. The immune algorithm is optimized and applied to the adjacent sub-aperture stitching to obtain the complete absolute surface shape. The 210 mm long flat crystal was measured, and the closed-loop self-test was designed to verify the correctness of the obtained reference mirror shape. The peak and valley value (PV) of reference mirror B is 53.64 nm, and the root mean square (RMS) value is 9.96 nm. The results of the closed-loop self-test are 58.63 nm and 10.86 nm, and the data are basically consistent with the surface shape diagram. The surface shape test results pass the closed-loop self-test. The absolute surface shape results after stitches are compared with those measured by a large aperture interferometer. The deviation of the PV value is less than lambda/135 (lambda=632.8 nm), and the deviation of the RMS value is less than lambda/75. The measurement resolution is 11 times that measured by a large aperture interferometer, which fully proves the accuracy and high resolution of the method.

Study of ultra-precise rotary scanning measuring technique for large aspheric surface

Research on Two Optical Methods for Aspheric Measurement

Measurement of Aspheric Surface

Aspheric and Free-Form Surfaces Test with Non-Null Sub-Aperture Stitching

An on-line measuring technique for lapping large aspherical mirror

Reserch on Technique of Large Aperture-Digital Wavefront Test

Study on testing larger asphericity in non-null interferometer - art. no. 68340T

Profile Measurements of Micro-Aspheric Surfaces Using an Air-Bearing Stylus with A Microprobe

High-Precision Aspheric Surface Measurement Using Scanning Deflectometry: Three-Dimensional Error Analysis and Experiments.

Full Area Covered 3D Profile Measurement of Special-Shaped Optics Based on a New Prototype Non-Contact Profiler.

Testing A Large Aspheric Surface Based on Analysis of Scanning 3d Interferogram

The Research of Basing on Simulative Compensator and Two-Wavelength Phase Shifting Interferometry for Testing Large Departure Aspheric Surface

A METHOD FOR MEASURING THE ABSOLUTE SURFACE SHAPE OF LARGE APERTURE OPTICAL FLAT

Reconstructing in Laser Wavelength Scanning Interference Test of Aspheric Surface

Full-Range Line-Field Optical Coherence Tomography for High-Accuracy Measurements of Optical Lens

Measurement of steep aspheric surfaces using improved two-wavelength phase-shifting interferometer

Numerical Simulation and Experimental Research of Using Spherical Reference Wavefront to Test Aspheric Surface

Aspheric Mirror Measurement Based on Fringe Reflection

Measurement Based on Fringe Reflection for Testing Aspheric Optical Axis Precisely and Flexibly.

Fizeau Interferometer with Binary Phase Fresnel-zone Plate Reference for Precision Measurement of Large Convex Lens

New Interferometric Method to Locate Aspheric in the Partial Null Aspheric Testing System