Abstract:The grain boundary (GB) microchemistry and precipitation behaviour in high-strength Al-Zn-Mg-Cu alloys has an important influence on their mechanical and electrochemical properties. Simulation of the GB segregation, precipitation, and solute distribution in these alloys requires an accurate description of the thermodynamics and kinetics of this multi-component system. CALPHAD databases have been successfully developed for equilibrium thermodynamic calculations in complex multi-component systems, and in recent years have been combined with diffusion simulations. In this work, we have directly incorporated a CALPHAD database into a phase-field framework, to simulate, with high fidelity, the complex kinetics of the non-equilibrium GB microstructures that develop in these important commercial alloys during heat treatment. In particular, the influence of GB solute segregation, GB diffusion, precipitate number density, and far-field matrix composition, on the growth of a population of GB <math>η</math>-precipitates, was systematically investigated in a model Al-Zn-Mg-Cu alloy of near AA7050 composition. It is shown that the GB solute distribution in the early stages of ageing was highly heterogeneous and strongly affected by the distribution of GB <math>η</math>-precipitates. Significant Mg and Cu GB segregation was predicted to remain during overageing, while Zn was rapidly depleted. This non-trivial GB segregation behaviour markedly influenced the resulting precipitate morphologies, but the overall precipitate transformation kinetics on a GB were relatively unaffected. Furthermore, solute depletion adjacent to the GB was largely determined by Zn and Mg diffusion, which will affect the development of precipitate free zones during the early stages of ageing. The simulation results were compared with scanning transmission electron microscopy and atom probe tomography characterisation of alloys of the similar composition, with good agreement.

STEM-HAADF Tomography Investigation of Grain Boundary Precipitates in Al–Cu–Mg Alloy

HRTEM and HAADF-STEM Tomography Investigation of the Heterogeneously Formed S (al2cumg) Precipitates in Al–Cu–Mg Alloy

Atomic-scale Investigation into Precipitated Phase Thickening in Al-Si-Mg-Cu Alloy

Three-dimensional characterization of Guinier–Preston zones in an Al–Cu alloy using depth-sectioning technique

Atom Probe Tomographic Study of Elemental Segregation at Grain Boundaries for a Peak-Aged Al–Zn–Mg Alloy

Atomistic Building Blocks of One-Dimensional Guinier–Preston–Bagaryatsky Zones in Al-Cu-Mg Alloys

Disclosing Differential Precipitation Behavior of a Novel High Mg-containing Al-Mg-Zn-Si Alloy

Experimental examination of strain field within GP zone in an Al–Zn–Mg–Cu alloy

High-resolution transmission electron microscopy and tomographic atom probe studies of the hardening precipitation in an Al–Cu–Mg alloy

Multiscale analysis of grain boundary microstructure in high strength 7xxx Al alloys

CALPHAD-informed phase-field modeling of grain boundary microchemistry and precipitation in Al-Zn-Mg-Cu alloys

An advantageous imaging perspective for quantitative evaluation of 7075 aluminum alloy grain boundary precipitates using scanning electron microscope

Grain boundary segregation in UFG alloys processed by severe plastic deformation

Θ′′′ Precipitate Phase, GP Zone Clusters and Their Origin in Al-Cu Alloys

Structural and crystallographic characterization of grain boundaries coarse particles in an Al–Mg–Si alloy, using convergent beam electron diffraction

3D Characterization of a Nanostructured Al-Cu-Mg Alloy

Precipitation in an Al-Zn-Mg-Cu alloy during isothermal aging: Atomic-scale HAADF-STEM investigation

Atomic-scale Characterization of the Precipitates in a Mg-Gd-Y-Zn-Mn Alloy Using Scanning Transmission Electron Microscopy

Effect of grain boundary and reinforced particles on grain boundary precipitates in TiB2/Al-Zn-Mg-Cu composite

Morphological evolution of GP zones and nanometer-sized precipitates in the AA2050 aluminium alloy

Evolution of Microstructure and Strain Field by Precipitation During Early Ageing of Al–Si–Mg–Cu Alloy