Abstract:Regulating the precipitation behavior of Mg alloys to overcome the strength-ductility trade-off puzzle is a long-thought pursuit in the materials community. With this purpose, external stress has been recently applied during aging and shows immense potential in affecting atomic diffusion, and regulating the coherence of the phase boundaries. In this study, elastic tensile (TSA) and compressive stress aging (CSA) of Mg-1.1Gd-0.6Zn-0.3Mn alloy are carried out and the competition of precipitation between multiple precipitates occurs during stress aging. A significant quantity of β’ precipitates primarily distribute along grain boundaries in conventional peak aging alloy. Whereas high density of γ’ phases rather than β’ phase precipitate in both TSA and CSA alloys. The first-principle calculations reveal that the application of external stress introduces shear strain, which decreases unstable stacking fault energies, and thereby promoting the precipitation of γ’ phase and impeding the precipitation of β’ phase. Furthermore, the sequential transformation from γ’ phase to Long Period Stacking Ordered (LPSO) phase occurs in CSA sample, due to the release of elastic local strain at phase boundaries. After subjected to TSA treatment, the sample possesses an ultimate tensile strength of 356 MPa, a yield strength of 294 MPa, and a total elongation of ∼14.3 %. The excellent strength-ductility synergy of TSA sample is primarily contributed to the profuse γ’ precipitates hindering the motion of large number of pyramidal 〈c + a〉 dislocations during tensile deformation. This study offers new insights on regulating the precipitation behavior of Mg alloys containing multiple types of precipitates through the application of external stress, and extends the potential window for obtaining an excellent strength-ductility synergy in age-hardenable Mg alloys.

Atomic-scale observation on the precipitates in various aging stages of Mg–Gd–Y–Cu alloy

Study on the Precipitates in Various Aging Stages and Composite Strengthening Effect of Precipitates and Long-Period Stacking Ordered Structure of Mg–Gd–Y–Ni Alloy

The Aging Behaviour of a Mg-10Gd-3Y-1.0Zn-0.5Zr (wt.%) Alloy with Long-Period Stacking Ordered Phase at 275°C

Precipitation Behavior of Mg-7Gd-3Y-2Zn-0.5Zr Alloy during Isothermal Aging

On the Strengthening Precipitate Structures in Mg-Gd-Ag Alloy: an Atomic-Resolution Investigation Using Cs-corrected STEM

Atomic-scale Observation of Β′ and LPSO Phase in Mg–Y–Ni Alloy by HAADF-STEM

A Detailed HAADF-STEM Study of Precipitate Evolution in Mg–Gd Alloy

Effect of aging temperature on the hardening behavior and precipitation evolution of Mg 10Gd alloy

Precipitation and Its Effect on Age-Hardening Behavior of As-Cast Mg–Gd–Y Alloy

Precipitate evolution of as-cast Mg-9Gd-2Y-0.5Zn-0.5Zr alloy containing LPSO, β′′, β′ and γ'' phases during isothermal aging at 200 °C

Incoherent long period stacking ordered phases and age-hardening in Mg-Gd-Ga alloys

Co-precipitation on the Basal and Prismatic Planes in Mg–Gd–Ag–Zr Alloy Subjected to Over-Ageing

Ageing Behavior of Extruded Mg–8.2Gd–3.8Y–1.0Zn–0.4Zr (wt.%) Alloy Containing LPSO Phase and Γ′ Precipitates

Novel structures observed in Mg–Gd–Y–Zr during isothermal ageing by atomic-scale HAADF-STEM

Mechanical Properties and Microstructure Evolution of Mg-Gd Alloy During Aging Treatment

Evolution of precipitates in Mg?7Gd?3Y?1Nd?1Zn?0.5Zr alloy with fine plate -like 14H-LPSO structures aged at 240?C

Atomic-scale Characterization of the Precipitates in a Mg-Gd-Y-Zn-Mn Alloy Using Scanning Transmission Electron Microscopy

Interactions Between Long-Period Stacking Ordered Phase and Β′ Precipitate in Mg–Gd–Y–Zn–Zr Alloy: Atomic-scale Insights from HAADF-STEM

Achieving Strength-Ductility Synergy in Mg-1.1Gd-0.6Zn-0.3Mn Alloy by Regulating Precipitation Behavior Via Stress Aging Strategy

Precipitation of Long‐Period Stacking Ordered Structure in Mg–Gd–Zn–Mn Alloy

Precipitate Evolution in Mg−7Gd−3Y−1Nd−1Zn−0.5Zr Alloy During Isothermal Ageing at 240 °C