Abstract:Al–Fe alloys have drawn attention of researchers for many decades since Fe is the most common impurity in Al that, because of its low solid solubility, forms brittle aluminides that affect the mechanical properties. Thus, it is interesting to provide microstructure control of these intermetallics and achieve high strength, thermal stability, and high electrical conductivity. High-pressure torsion (HPT) has been applied to an Al–2%Fe alloy with two different eutectic phases containing Al 6 Fe and Al 3 Fe intermetallics, to refine, disperse and partially dissolve them. The microstructure after HPT processing at different levels of imposed strain was observed using aberration-corrected high-resolution scanning/transmission electron microscopy (HR-S/TEM) to perform a detailed analysis of the dispersion of intermetallic phases and their orientation relationships with the Al matrix. The precipitates from the supersaturated solid solution achieved by post HPT aging, responsible for age-hardening were also studied in detail. Fragmentation of secondary Al 3 Fe and Al 6 Fe phases occurs down to sizes in the nano-scale and a fine dispersion of particles with coherency with the matrix in lattice planes with similar spacing (low misfit strain) was observed even after high straining by HPT. Semi-coherent Al 6 Fe is the dominant precipitate in the peak-aged condition and phase transformation of the particles from Al 6 Fe to Al 3 Fe occurs with aging. The Al 3 Fe particles loose coherency as they grow in size. It was possible to explain the age hardening effect with respect to the coherency and orientation relationship of the Fe-containing particles in the nano-scale, by a similar mechanism for Al alloys with miscible elements, which has not been reported for ultrafine-grained Al–Fe alloys to date.

High-resolution transmission electron microscopy and tomographic atom probe studies of the hardening precipitation in an Al–Cu–Mg alloy

Atomic-scale study on the precipitation behavior of an Al-Zn-Mg-Cu alloy during isochronal aging

Fine precipitation scenarios of AlZnMg(Cu) alloys revealed by advanced atomic-resolution electron microscopy study Part I: Structure determination of the precipitates in AlZnMg(Cu) alloys

Early-Stage Precipitation Phenomena and Composition-Dependent Hardening in Al-Mg-Si-(Cu) Alloys

High resolution electron microscopy of phase decomposition microstructures in aluminium-based alloys

Transmission Electron Microscopy Study of the Early-Stage Precipitates in Al-Mg-Si Alloys

Microstructure Imaging, Precipitation Formation and Mechanical Properties: Al–Li and Al–Mg–Zn Alloys

Interfacial Segregation and Precipitates Behavior in the Ultrafine Grained Al-based Metal Matrix Composites

High-Resolution Electron Microscopy and Kinetic Studies of Precipitation Hardening Reactions in Cast Al-5.8Zn-2.2Mg-2.5Cu

Characterization and structure of precipitates in 6xxx Aluminium Alloys

Atomic structure of clusters and GP-zones in an Al-Mg-Si alloy

Analysis of precipitate density of an aluminium alloy by TEM and AFM

Revisiting the precipitation mechanisms of Guinier-Preston zones, η′, and η precipitates in Al-Zn-Mg alloys

Morphological evolution of GP zones and nanometer-sized precipitates in the AA2050 aluminium alloy

High-resolution electron microscopy study of particle dispersion and precipitation in a nanostructured Al–2%Fe alloy

Atomic-scale investigation of the heterogeneous precipitation in the E (Al18Mg3Cr2) dispersoid of 7075 aluminum alloy

A multidisciplinary approach to study precipitation kinetics and hardening in an Al-4Cu (wt. %) alloy

Guinier-Preston zones observed by high-angle annular detector dark-field scanning transmission electron microscopy

Transmission Electron Microscopy Investigation and Interpretation of the Morphology and Interfacial Structure of the ∊′-Mg54ag17precipitates in an Mg–Sn–Mn–Ag–Zn Alloy

Investigation on the age-hardening behavior of Al–Si–Cu–Mg cast alloys by mechanical testing, microstructural characterization, and a CNGT based precipitation model

The evolution of precipitate crystal structures in an Al-Mg-Si(-Cu) alloy studied by a combined HAADF-STEM and SPED approach