Abstract:Spherical and well-dispersed silica/poly[styrene-co-(acrylic acid)] (SiO2/PSA) core-shell particles have been synthesized using an improved phase-inversion process. The resulting particles were successfully used as supports for polyolefin catalysts in the production of polyethylene with broadmolecular weight distribution. Through the vapor phase, instead of the liquid phase in the traditional process, a non-solvent was introduced into a mixture of micrometer-sized SiO2 and PSA solution. The core-shell structure of the resulting SiO2/PSA microspheres was confirmed using optical microscopy, scanning electron microscopy, Fourier transfer infrared spectrometry, thermogravimetric analysis and measurement of nitrogen adsorption/desorption isotherms. In order to avoid agglomeration of particles and to obtain a good dispersion of the SiO2/PSA core-shell microspheres, the non-solvent was added slowly. As the concentration of PSA solution increased, the surface morphology of the core-shell particles became looser and more irregular. However, the surface area and the pore volume remained the same under varying PSA concentrations. The SiO2/PSA core-shell microspheres obtained were used as a catalyst carrier system in which the core supported (n-BuCp)(2)ZrCl2 and the shell supported TiCl4. Ethylene/1-hexene copolymerization results indicated that the zirconocene and titanium-based Ziegler-Natta catalysts were compatible in the hybrid catalyst, showing high activities. The resulting polyethylene had high molecular weight and broadmolecular weight distribution. (C) 2010 Society of Chemical Industry

Study on Preparation and Reaction Performance of Silica Sol Matrix Additive

An Improved Phase-Inversion Process for the Preparation of Silica/Poly[Styrene-Co-(Acrylic Acid)] Core-Shell Microspheres: Synthesis and Application in the Field of Polyolefin Catalysis

Organize modification of silica sol and its application in adhesives

Preparation of Silica Sol and Effect of Preparation Conditions on Its Properties

Study on preparation and surface modification of precipitated silica obtained from fly ash

Optimization of Conditions for Preparation of ZSM-5@silicalite-1 Core–shell Catalysts Via Hydrothermal Synthesis

Influence of Acidic and Alkaline Silica Sols on the Performance of Cu/Zn/Al Slurry Catalysts

Study on preparation of magnesia-alumina spinel additive and its performances of catalytic olefin reduction

Study on Preparation of Silica Sol by Silicon Dissolution & Dripping water glass Method

Crucial Role of Silica-Alumina Binder Mixtures for Hydrocarbon Cracking with ZSM-5 Additives

Synthesis and characterization of amorphous silica-alumina with enhanced acidity and its application in hydro-isomerization/cracking

Preparation of silica-supported late transition metal catalyst and ethylene polymerization

Preparation of Additive for Desulfurization of Flue Gas in Fluidized Catalytic Cracking Process and Its Desulfurization Activity

STUDY ON THE PREPARATION TECHNIQUE OF SiO2 AEROGELS/FIBER COMPOSITES

Study on the Modification of Superfine Amorphous Silica by Liquid-phase Precipitation Method

Improved Synthesis of SBA-15 Mesoporous Silica Fitting for Industrial Production

Preparation of Silica by Alkaline-Heating and Precipitation Method from Corn Straw Ash

Preparation of Silica Membrane by So-l gel Method and Its Performances

Preparation and Characterization of Large-Particle Pure Silica Sol

Study on the Additive for Desulfurization in FCC Gasoline

Preparation and Characterization of Trialkoxysilane‐Containing Acrylic Resin/Alumina Hybrid Materials