Abstract:The particle size and pore size of spherical mesoporous silica materials play significant roles in their application. However, relatively limited systematic research has been conducted on how preparation conditions influence these properties. In particular, the effects of some important factors have not been adequately studied, including reaction time, reaction temperature, and organic solvent type. In this work, octane and water were used as solvents, and tetraethyl orthosilicate was used as the silicon source to systematically study the effects of reaction time, reaction temperature, different organic solvents, octane/water mass ratio, styrene template concentration, and surfactant (cetyltrimethylammonium bromide, CTAB)/H2O mass ratio on the particle morphology, particle size, and pore size of silica. The results suggest that the above-mentioned neglected factors exert a substantial influence on both particle size and pore size. In the experimental temperature range, the pore diameter decreases and the particle size increases with increasing temperature. The maximum particle size and pore size are achieved after a reaction time of 3 h, and a further increase in reaction time leads to a smaller particle size and pore size. As the number of carbon atoms in the organic solvent decreases, the pore size also gradually increases. Styrene and organic solvents that dissolve in CTAB micelles are crucial factors in pore formation, while the aggregation of the swollen CTAB micelles influences the particle size. The changes in the pore structure stability and hydroxyl density of the synthesized samples in water were also studied. After undergoing water treatment at temperatures ranging from 20 to 60 °C for 72 h, both the pore structure and morphology remain relatively unchanged. When the temperature increases, the surface hydroxyl density exhibits a more pronounced increase in the presence of water. After water treatment for 5 h, the surface hydroxyl density reaches saturation.

Preparation of Silica Sol and Effect of Preparation Conditions on Its Properties

Effect of Reaction Matters Proportioning of Silica Sol on Its Properties

Preparation of Silica Membrane by So-l gel Method and Its Performances

Preparation and Characterization of Large-Particle Pure Silica Sol

Study on Preparation of Silica Sol by Silicon Dissolution & Dripping water glass Method

Study on Preparation and Reaction Performance of Silica Sol Matrix Additive

STUDY ON THE PREPARATION TECHNIQUE OF SiO2 AEROGELS/FIBER COMPOSITES

Preparation of Methyltrimethoxysilane Derived Silica Aerogel Films via Ambient Pressure Drying

Effects of the synthesis hydrogel on the formation of zeolite LTA membranes

Preparation and Performance of Porous Membrane Materials Using the Sol-Gel Method

Preparation Of Monodispersed Silica Colloids Using Sol-Gel Method: Cosolvent Effect

Preparation of nano-silica hybrid membranes

Surface Wettability and Vapour Stability of Silica Membranes Modified by Sol-Gel Method

Effects of porogen EDTA on morphology of porous silica support and preparation of MFI zeolite membrane

Preparation and Crystallization of Si-Al Gel

Direct Preparation of Silica Hollow Spheres in a Water in Oil Emulsion System: the Effect of Ph and Viscosity

Preparation of KH-570 Modified Silica Sol and its Reaction Stability

Effects of synthesis conditions on particle size and pore size of spherical mesoporous silica

Preparation and Growth of Silica Sol from Sodium Silicate

Preparation of Silica Material with High Pore Volume by Precipitation in Membrane Dispersion Reactor

Preparation of Catalyst-free High Purity Nano-silica Powder