Abstract:In the process of CO hydrogenation to olefins by the Fischer-Tropsch synthesis (FTO), the support is a key factor in the activity, selectivity, and thermal and chemical stability of the catalysts, and magnesium aluminate spinel (MgAl2O4) has recently been reported to be very effective. In this work, three methods, namely, citric acid solution combustion (MAC), EDTA sol-gel (MAG) and NH3-coprecipitation (MAP) have been employed to prepare the spinel with detailed characterization of the structure, specific surface area, porosity, and alkalinity properties of both the as-synthesized spinel and the supported catalysts. The results showed that MAC and MAG possessed stronger basicity with more homogeneous particle sizes and narrower distribution of the pore size due to the formation of the metal-nitrate-chelate-complex. This led to a large quantity of gas being released during calcination, however, stronger interactions between the active phase and MAC resulted in lower CO conversion. The catalyst supported on MAP (CMAP) exhibited the highest CO conversion, the highest selectivity of lower olefins, the shortest induction period of reaction, and the lowest AFS chain growth probability; thus, MAP was suggested as an applicable synthetic method. Based on the CMAP catalyst, the effects of the operational conditions were investigated and a 200 hour stability test was carried out with satisfactory performance.

Study on preparation of magnesia-alumina spinel additive and its performances of catalytic olefin reduction

The Effect of Lanthanum and Niobium on Additives for Olefins Reduction of Fcc Gasoline

Ce/MgAl_2O_4 and Nb/MgAl_2O_4 Additives for Olefin-Reducing in Fluid Catalytic Cracking Gasoline

Study on Additives for Reducing Olefins in the FCC Gasoline

The Study on Cerium-Supported Spinel Additives for Reducing Olefins in the Fluid Catalytic Cracking (FCC) Gasoline

STUDY ON THE LANTHANUM AND CERIUM MODIFIED FCC LIQUID ADDITIVE FOR REDUCING OLEFINS IN FCC NAPHTHA

Study on Preparation and Reaction Performance of Silica Sol Matrix Additive

Effect of Methanol on Catalytic Performance of Hy Zeolite for Desulfurization of Fcc Gasoline by Alkylation

Hydrogenation of CO to olefins over a supported iron catalyst on MgAl2O4 spinel: effects of the spinel synthesis method

Evaluation of Crystalline Structure and SO2 Removal Capacity of a Series of MgAlFeCu Mixed Oxides As Sulfur Transfer Catalysts

CuO,CeO2 Modified Mg-Al Spinel As Additives for Removal of SOx and NOx from FCC Flue Gas

Enhancement of Catalytic Performances for Reduction of NOx in FCC Flue Gas Over CuO Modified Mg-Al Spinel

Preparation of Additive for Desulfurization of Flue Gas in Fluidized Catalytic Cracking Process and Its Desulfurization Activity

Influence of the Chemical Composition of MgAlFeCu Mixed Oxides As Catalysts for SO2Removal

An Insight into Effect of Methanol on Catalytic Behavior of Amberlyst 35 Resins for Alkylation Desulfurization of Fluid Catalytic Cracking Gasoline

Investigations on Desulfurization Additive Zn/Mg-Al for Catalytic Creaking Gasoline

STUDY ON DOUBLE-FUNCTION ADDITIVES IN CATALYTIC CRACKING

Reduction of Nox in Fluid Catalytic Cracking Flue Gas over Mg-Al Spinel Modified with Transition Metal Oxides

Study on the Additive for Desulfurization in FCC Gasoline

IMPROVEMENT OF STABILITY OF OUT-LAYER MgAl 2 O 4 SPINEL FOR A Ni / MgAl 2 O 4 / Al 2 O 3 CATALYST IN DRY REFORMING OF METHANE

STUDY OF CATALYTIC BEHAVIOURS OF THE SPINEL STRUCTURE NdxMg1- xAl2O4 COMPOSITION WITH ZSM-5 ZEOLITE IN ETHYLBENZENE DISPROPORTIONATION