Abstract:Herein, a series of alumina supports were prepared by rehydration-dehydration of the traditional gamma-Al2O3 under different hydrothermal temperatures. After loading CoMo species, it was found the selectivity factor of corresponding CoMo/Al2O3 catalysts was improved greatly from 1.21 to 2.51 with the increased hydrothermal temperature of alumina supports in the hydrodesulfurization (HDS) of a model fluid catalytic cracking (FCC) naphtha. The improved HDS selectivity is attributed to the weakened metal-support interaction and lowered dispersion of MoS2 particles, resulting in catalysts with larger edge-to-corner ratios of CoMoS slabs ((f(e)/f(c))(CoMo)). Besides, the recombination mercaptans formed by reaction of produced H2S and olefins were found as a big challenge to reach a high HDS conversion (S < 10 ppm) when only using the selective HDS catalyst (one-unit process). Therefore, a two-unit process has been developed by using a selective HDS catalyst to remove the most of the refractory sulfur compounds firstly, after which using another mercaptan-removing catalyst to deal with the recombination mercaptans specially. The catalytic results show that the two-unit process has a smaller olefin loss (4.38 v%) than that of one-unit process (7.08 v%) when reducing the sulfur concentration of a heavy FCC fraction to less than 10 ppm, thus resulting in a 0.7 unit less of the research octane number loss. The present work shows that high HDS conversion and low olefin hydrogenation conversion in selective HDS of FCC gasoline can be achieved through optimization design of both the selective HDS catalyst and the whole technology.

Ce/MgAl_2O_4 and Nb/MgAl_2O_4 Additives for Olefin-Reducing in Fluid Catalytic Cracking Gasoline

The Effect of Lanthanum and Niobium on Additives for Olefins Reduction of Fcc Gasoline

STUDY ON THE LANTHANUM AND CERIUM MODIFIED FCC LIQUID ADDITIVE FOR REDUCING OLEFINS IN FCC NAPHTHA

Study on Additives for Reducing Olefins in the FCC Gasoline

Influence of Ce/Nb Molar Ratios on Oxygen-Rich CexNb1-xO4+δ Materials for Catalytic Combustion of VOCs in the Process of Polyether Polyol Synthesis

Study on preparation of magnesia-alumina spinel additive and its performances of catalytic olefin reduction

The Study on Cerium-Supported Spinel Additives for Reducing Olefins in the Fluid Catalytic Cracking (FCC) Gasoline

Study on the Additive for Desulfurization in FCC Gasoline

STUDY ON DOUBLE-FUNCTION ADDITIVES IN CATALYTIC CRACKING

Study on Complex Desulphurization Additives for FCC

Investigations on Desulfurization Additive Zn/Mg-Al for Catalytic Creaking Gasoline

Influence of the Chemical Composition of MgAlFeCu Mixed Oxides As Catalysts for SO2Removal

Effect of Methanol on Catalytic Performance of Hy Zeolite for Desulfurization of Fcc Gasoline by Alkylation

Evaluation of Crystalline Structure and SO2 Removal Capacity of a Series of MgAlFeCu Mixed Oxides As Sulfur Transfer Catalysts

An Insight into Effect of Methanol on Catalytic Behavior of Amberlyst 35 Resins for Alkylation Desulfurization of Fluid Catalytic Cracking Gasoline

MgAlFeCu Mixed Oxides for SO2 Removal Capacity: Influence of the Copper and Aluminum Incorporation Method

Catalytic Mechanism of MCM-41 Supported Phosphoric Acid Catalyst for FCC Gasoline Desulfurization by Alkylation: Experimental and Theoretical Investigation

Properties of MgAlCuFe Complex Oxides for FCC Desulfurization: Effect of Metal Salt Precursors

Influence of Modification of FCC Catalyst on Its Activity and Sulfur Transfer

Influence of Modification of Fluid Catalytic Cracking FCC Catalyst on the Performance of Hydrogen Transfer

Optimizing Both the CoMo/Al2O3 Catalyst and the Technology for Selectivity Enhancement in the Hydrodesulfurization of FCC Gasoline