Abstract:A series of ceria-based composite materials consisting of samaria doped ceria (SDC) and binary carbonates(Li2CO3–Na2CO3) were examined as functional electrolytes for low-temperature solid oxide fuel cells (SOFCs). DTA and SEM techniques were applied to characterize the phase- and micro-structural properties of the composite materials. Conductivity measurements were carried on the composite electrolytes with a.c. impedance in air. A transition of ionic conductivity with temperature was occurred among all samples with different carbonate content, which related to the interface phase. Single cells based on the composite electrolytes, NiO as anode and lithiated NiO as cathode, were fabricated by a simple dry-pressing process and tested at 400–600°C. The maximum output power at 600°C increased with the carbonate content in the composite electrolytes, and reached the maximum at 25wt.%, then decreased. Similar trend has also shown at 500°C, but the maximum was obtained at 20wt.%. The best performances of 1085mWcm−2 at 600°C and 690mWcm−2 at 500°C were achieved for the composite electrolytes containing 25 and 20wt.% carbonates, respectively. During fuel cell operation, it found that the SDC-carbonate composites are co-ionic (O2−/H+) conductors. At lower carbonate contents, both oxide–ion and proton conductions were significant, when the content increased to 20–35wt.%, proton conduction dominated. The detailed conduction mechanism in these composites needs further investigation.

Reduced-Temperature Solid Oxide Fuel Cells Fabricated by Screen Printing

Low Temperature Solid Oxide Fuel Cell with Ba0.5sr0.5co0.8fe0.2o3 Cathode Prepared by Screen Printing

A Screen-Printed Ce0.8Sm0.2O1.9 Film Solid Oxide Fuel Cell with a Ba0.5Sr0.5Co0.8Fe0.2O3−δ Cathode

Intermediate-temperature SOFCs with Thin Ce0.8Y0.2O1.9 Films Prepared by Screen-Printing

Spin-coating derived solid oxide fuel cells operated at temperatures of 500 °c and below

Low Temperature Solid Oxide Fuel Cells Based on Sm0.2Ce0.8O1.9 Films Fabricated by Slurry Spin Coating

Development of Novel Low-Temperature SOFCs with Co-Ionic Conducting SDC-carbonate Composite Electrolytes

Electrochemical Performance of a Solid Oxide Fuel Cell Based on Ce0.8Sm0.2O2−δ Electrolyte Synthesized by a Polymer Assisted Combustion Method

High-Performance, Ceria-Based Solid Oxide Fuel Cells Fabricated at Low Temperatures

A cathode-supported SOFC with thin Ce0.8Sm0.2O1.9 electrolyte prepared by a suspension spray

Fabrication and Electrochemical Characterization of Anode-Supported Microtubular Solid Oxide Fuel Cells Based on Ce0.8sm0.2o2-D Electrolytes

Low-temperature co-sintering of co-ionic conducting solid oxide fuel cells based on Ce 0.8 Sm 0.2 O 1.9 -BaCe 0.8 Sm 0.2 O 2.9 composite electrolyte

Preparation and Performance of Nanostructured Porous Thin Cathode for Low-Temperature Solid Oxide Fuel Cells by Spin-Coating Method

Fabrication of NiO-SDC Composite Anodes Using Gel-Casting for Low-Temperature SOFCs

Development of Solid Oxide Fuel Cell Materials for Intermediate-to-low Temperature Operation

Low Temperature Solid Oxide Fuel Cells with Hierarchically Porous Cathode Nano-Network

Fabrication and Characterization of Composite Electrolyte for Intermediate-Temperature SOFC

Intermediate temperature solid oxide fuel cell composite cathodes consisting of nanostructured LSM and SDC particles

Fe-Doped SDC Solid Solution as an Electrolyte for Low-to-Intermediate-Temperature Solid Oxide Fuel Cells

Composite Electrolyte Based On Nanostructured Ce0.8sm0.2o1.9 (Sdc) For Low-Temperature Solid Oxide Fuel Cells

Low-temperature SOFCs based on Gd0.1Ce0.9O1.95 fabricated by dry pressing