Abstract:Phase-change memory (PCM) and resistive memory (RRAM) are promising alternatives to traditional memory technologies. However, both PCM and RRAM suffer from limited write endurance. Wear-leveling (WL) techniques are essential to extend the lifetime of these memories before experiencing endurance faults. Beyond the additional usage afforded by WL, row-sparing and focused error correction can extend the lifetime further after wear faults appear. Unfortunately, the need for extended WL techniques continues to become more pressing as scaling exacerbates process variation. Similarly, scaling causes challenges such as more severe noise and crosstalk to traditional DRAM.In this paper, we propose novel fault-aware WL schemes to allocate write frequencies according to the strength of the rows and handle the imbalance of writes in columns. We use runtime detection schemes to identify weak rows and protect them prior to wear out. In particular, row-level WL, aka RETROFIT, leverages the spare rows provided for redundancy to be used strategically to guard against early cell wear out. RETROFIT is compatible with error correction schemes that guarantee to mitigate hard faults and error-correcting codes (ECC). Rather than discard retired rows, when any spare row completely replaces a retired row, we retarget the retired row to assist with column sparing. It becomes a group of Page Protecting Pointers (PPPs), which utilizes otherwise discarded error correction potential to further enhance the leveling ability of RETROFIT. To relieve column-level imbalance, we apply idle error correction bits before they are used to reduce average bit flips. The evaluation demonstrates that RETROFIT and enhanced RETROFIT with the PPPs improve lifetime by as much as 0.64× and 5.4× in the average case, respectively, over state-of-the-art row-level method while also reducing area overhead. In the worst-case scenario, these improvements further increase to 2.6× and 16.0×. Combined with the proposed column-level WL, enhanced RETROFIT realizes an overall 1.5× memory lifetime improvement over the perfectly uniform wear-leveling with equal storage overhead.

A NOVEL SELF-ADAPTIVE WORDLINE VOLTAGE GENERATOR FOR HIGH OPERATIONAL RELIABILITY IN PHASE CHANGE MEMORY

A High-Performance Wordline Voltage-Generating System for Low-Power Low-Voltage Flash Memory

A Novel Design for Multilevel Storage and Superb Reliability in Phase-Change Memory

Phase-change Heterostructure Enables Ultralow Noise and Drift for Memory Operation.

A Self-Adaptive Write Driver with Fast Termination of Step-Up Pulse for Reram

Exploit Imbalanced Cell Writes to Mitigate Write Disturbance in Dense Phase Change Memory

Low-Power High-Yield Sram Design With Vss Adaptive Boosting And Bl Capacitance Variation Sensing

A Novel Sourceline Voltage Compensation Circuit for Embedded nor Flash Memory

MLC nand flash retention error recovery scheme through word line program disturbance

ASAP: an Efficient and Reliable Programming Algorithm for Multi-level RRAM Cell

A High Speed Asymmetric T-Shape Cell in Nmos-Selected Phase Change Memory Chip

Reference Voltage Generation Scheme Enhancing Speed and Reliability for 1t1c‐type FRAM

Balanced Modulation for Nonvolatile Memories

Design of Reading Circuit for High-Reliability 55-Nm Split-Gate SuperFlash Technology

Reliability significant improvement of resistive switching memory by dynamic self-adaptive write method

Adaptive Circuit Approaches to Low-Power Multi-Level/Cell FeFET Memory

A Low Active Leakage and High Reliability Phase Change Memory (PCM) Based Non-Volatile FPGA Storage Element

Enhanced Read Performance For Phase Change Memory Using A Reference Column

A 0.13µm 8Mb logic based Cu<inf>x</inf>Si<inf>y</inf>O resistive memory with self-adaptive yield enhancement and operation power reduction

Realizing Extreme Endurance Through Fault-aware Wear Leveling and Improved Tolerance.

Hybrid Program Algorithm Enables Significant Reduction in Write Latency and Power Consumption for Multilevel Phase Change Memory