Abstract:Phase-change memory (PCM) and resistive memory (RRAM) are promising alternatives to traditional memory technologies. However, both PCM and RRAM suffer from limited write endurance. Wear-leveling (WL) techniques are essential to extend the lifetime of these memories before experiencing endurance faults. Beyond the additional usage afforded by WL, row-sparing and focused error correction can extend the lifetime further after wear faults appear. Unfortunately, the need for extended WL techniques continues to become more pressing as scaling exacerbates process variation. Similarly, scaling causes challenges such as more severe noise and crosstalk to traditional DRAM.In this paper, we propose novel fault-aware WL schemes to allocate write frequencies according to the strength of the rows and handle the imbalance of writes in columns. We use runtime detection schemes to identify weak rows and protect them prior to wear out. In particular, row-level WL, aka RETROFIT, leverages the spare rows provided for redundancy to be used strategically to guard against early cell wear out. RETROFIT is compatible with error correction schemes that guarantee to mitigate hard faults and error-correcting codes (ECC). Rather than discard retired rows, when any spare row completely replaces a retired row, we retarget the retired row to assist with column sparing. It becomes a group of Page Protecting Pointers (PPPs), which utilizes otherwise discarded error correction potential to further enhance the leveling ability of RETROFIT. To relieve column-level imbalance, we apply idle error correction bits before they are used to reduce average bit flips. The evaluation demonstrates that RETROFIT and enhanced RETROFIT with the PPPs improve lifetime by as much as 0.64× and 5.4× in the average case, respectively, over state-of-the-art row-level method while also reducing area overhead. In the worst-case scenario, these improvements further increase to 2.6× and 16.0×. Combined with the proposed column-level WL, enhanced RETROFIT realizes an overall 1.5× memory lifetime improvement over the perfectly uniform wear-leveling with equal storage overhead.

MLC nand flash retention error recovery scheme through word line program disturbance

Word line program disturbance based data retention error recovery strategy for MLC NAND Flash

LSB Page Refresh Based Retention Error Recovery Scheme for MLC NAND Flash

Data Pre-Emphasis Based Retention Reliability Enhance Scheme For Mlc Nand Flash Memories

Experimental Characterization, Optimization, and Recovery of Data Retention Errors in MLC NAND Flash Memory

A High-Performance Wordline Voltage-Generating System for Low-Power Low-Voltage Flash Memory

Study of a Phenomenon of High Error WL in Mixed Read and Program Operations in 3-D NAND Flash

Read Disturb Errors in MLC NAND Flash Memory

Enhancing the Reliability of MLC NAND Flash Memory Systems by Read Channel Optimization

Realizing Extreme Endurance Through Fault-aware Wear Leveling and Improved Tolerance.

Bilayer LDPC Codes Combined with Perturbed Decoding for MLC NAND Flash Memory

LDPC coding scheme for improving the reliability of multi-level-cell NAND flash memory in radiation environments

Reliability Improvement in Vertical NAND Flash Cells Using Adaptive Incremental Step Pulse Programming (A-ISPP) and Incremental Step Pulse Erasing (ISPE)

Data-Aware 3-D TLC NAND flash Memory Reliability Optimization

Exploit Imbalanced Cell Writes to Mitigate Write Disturbance in Dense Phase Change Memory

Exploiting Error Characteristic to Optimize Read Voltage for 3-D NAND Flash Memory

Architectural Techniques for Improving NAND Flash Memory Reliability

Study for NOR Flash Cell Burn out Failure Improvement in the Advanced Node below 65Nm

Impact of Program–Erase Operation Intervals at Different Temperatures on 3D Charge-Trapping Triple-Level-Cell NAND Flash Memory Reliability

Modeling Retention Errors of 3D NAND Flash for Optimizing Data Placement

Near-Free Lifetime Extension for 3-D nand Flash via Opportunistic Self-Healing