Abstract:Due to its high versatility and cost-effectiveness, solution process has a remarkable advantage over physical or chemical vapor deposition (PVD/CVD) methods in developing flexible resistive random-access memory (RRAM) devices. However, the reported solution-processed binary oxides, the most promising active layer materials for their compatibility with silicon-based semiconductor technology, commonly require high-temperature annealing (>145 °C) and the RRAMs based on them encounter insufficient flexibility. In this work, an amorphous and uniform SiOx active layer was prepared by irradiating an inorganic polymer, perhydropolysilazane, with a vacuum ultraviolet of 172 nm at room temperature. The corresponding RRAM showed typical bipolar resistance switching with a forming-free behavior. The device on polyimide film exhibited outstanding flexibility with a minimum bending radius of 0.5 mm, and no performance degradation was observed after bending 2000 times with a radius of 2.3 mm, which is the best among the reported solution-processed binary oxide-based RRAMs and can even rival the performance of PVD/CVD-based devices. This room-temperature solution process and the afforded highly flexible RRAMs have vast prospects for application in smart wearable electronics.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c16556?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c16556</a>.XRD patterns of the Au substrate and VUV-irradiation SiOx films on Au substrate (Figure S1); the SEM image of the SiOx layer on Au/glass substrate (Figure S2); the electroforming-free performance of the prepared device (Figure S3); I–V curves in a semilogarithmic plot of the Ag/SiOx/Au/glass device in vacuum environment (7.4 × 10–3 Pa) (Figure S4); the wide-scan XPS spectra of the SiOx fabricated with different heating temperatures and VUV-irradiation processes (Figure S5); the I–V curve for the 8 nm device after a few cycles and the 50 nm device (Figure S6); the relationship between the coefficient of variation (σ/μ) and size (Figure S7); the I–V curve of the HRS fitting with SCLC, P-F emission, and thermionic emission mechanism; the I–V curves of the HRS fitting with the Schottky emission mechanism at different temperatures from 303 to 343 K (Figure S8); the I–V measurement result during 349 cycles corresponding to <a class="internalNav" href="#fig3">Figure </a><a class="internalNav" href="#fig3">3</a>c drawn in a diagram (Figure S9); the I–V measurement result for Ti/SiOx/Au/glass during 108 cycles (Figure S10); the resistance of HRS and LRS as a function of the bending strain in outward direction (Figure S11); the change of the resistance with bending numbers in outward direction with a radius of 0.5 mm (Figure S12); the nano-indentation test (by Agilent Nano Indenter G200) for the SiOx layer (Figure S13); the device-to-device data corresponding to <a class="internalNav" href="#fig6">Figure </a><a class="internalNav" href="#fig6">6</a>a,c,d, respectively (Figure S14); the pictures of the hand-made hinge structure (Figure S15); and the details of the bending experiments (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c16556/suppl_file/am0c16556_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

A 0.13µm 8Mb logic based Cu<inf>x</inf>Si<inf>y</inf>O resistive memory with self-adaptive yield enhancement and operation power reduction

A 0.13μm 8Mb logic based Cu xSi yO resistive memory with self-adaptive yield enhancement and operation power reduction

A 0.13 Μm 8 Mb Logic-Based Cu $_{\rm X}$si $_{\rm Y}$o ReRAM with Self-Adaptive Operation for Yield Enhancement and Power Reduction

A 0.13 µm 8 Mb Logic-Based Cu Si O ReRAM With Self-Adaptive Operation for Yield Enhancement and Power Reduction

Self-rectifying Memristors with High Rectification Ratio and Dynamic Linearity for In-Memory Computing

A Novel Cuxsiyo Resistive Memory in Logic Technology with Excellent Data Retention and Resistance Distribution for Embedded Applications

A Dual Core Oxide 8T SRAM Cell with Low Vccmin and Dual Voltage Supplies in 45nm Triple Gate Oxide and Multi Vt CMOS for Very High Performance Yet Low Leakage Mobile SoC Applications

A CuxO-based resistive memory with low power and high reliability for SOC nonvolatile memory applications

<formula formulatype="inline"><tex Notation="TeX">$\hbox{ZrO}_{2}$</tex></formula>-Based Memory Cell With a Self-Rectifying Effect for Crossbar WORM Memory Application

Design and Realization of a 0.13 Μm 1 Mb Resistive Random Access Memory

Reliability significant improvement of resistive switching memory by dynamic self-adaptive write method

A 0.13μm 64Mb HfO<inf>x</inf> ReRAM using configurable ramped voltage write and low read-disturb sensing techniques for reliability improvement

Logic-Based Mega-Bit CuxSiyO emRRAM with Excellent Scalability Down to 22nm Node for post-emFLASH SOC Era

Self-Rectifying and Forming-Free Resistive-Switching Device for Embedded Memory Application

Algorithm-Enhanced Retention Based on Megabit Array of $\hbox{cu}_{x}\hbox{si}_{y}\hbox{o}$ RRAM

Improved Al 2 O 3 RRAM performance based on SiO 2 /MoS 2 quantum dots hybrid structure

Self-Formed Conductive Nanofilaments in (bi, Mn)O-X for Ultralow-Power Memory Devices

Complementary Metal Oxide Semiconductor Compatible Hf-Based Resistive Random Access Memory with Ultralow Switching Current/Power

Room-Temperature, Solution-Processed SiO x via Photochemistry Approach for Highly Flexible Resistive Switching Memory

Variation-Tolerant Cuxsiyo-Based Rram For Low Power Application

Modulating Metallic Conductive Filaments Via Bilayer Oxides in Resistive Switching Memory