Abstract:This paper presents a multiscale analysis of the classical borehole instability problem in high‐porosity sandstones using a hierarchical multiscale approach. A rigorous, two‐way message‐passing coupling of finite element method and discrete element method is employed, where the finite element method is employed to solve a boundary value problem and the constitutive material responses required at each of its integration points are derived by the discrete element method solution to an embedded representative volume element instead of by using an assumed phenomenological model. We employ this multiscale approach to examine the successive failure of a borehole subjected to gradually decreased support stresses at the inner borehole wall or increased far‐field stresses. To reproduce the material behavior of high‐porosity sandstone, representative volume elements with a high‐porosity structure and interparticle bonds are generated. It is found that stress concentration triggers the initial failure at the borehole wall, and the subsequent failure in form of deformation bands is driven by further stress concentration ahead of the band tips. The failure pattern around the borehole varies with initial stress state and global loading path. The comparison of the local stress paths of the initial failure points in various cases reveals that the change of failure pattern from shear failure to mixed‐mode failure and to compaction failure is dominated by the increased mean stress. Cross‐scale parametric studies show that the failure mode changes from clear compaction bands to multiple arrays of shear bands by changing the high‐porosity specimen to a low‐porosity one. The increase in cohesion strength expands the yield locus and enlarges the critical mean stress between different failure patterns. Hence, the failure mode may change from compaction failure to mixed‐mode failure or from mixed‐mode failure to shear failure due purely to the increased cohesion strength. The qualitative comparisons indicate greater length, larger area, and more severe damage of the diametrically opposite failure with the increase in minor principal stress σ0 and principal stress ratio. The diametrically opposite failure mode is found a good indicator for σ0 direction, but it may also occur under hydrostatic far‐field stress due to material anisotropy.

On the role of capillary instabilities in the sandcastle effect

Theoretical Breakage Mechanics and Experimental Assessment of Stresses Surrounding Piles Penetrating into Dense Silica Sand

Shear Behaviour of Sand-Rubber Mixtures: Interpretation from Energy Transformation and Force Chain Evolution

Multiscale Insights into Borehole Instabilities in High‐Porosity Sandstones

Experimental Study of Cyclic Shear Stiffness and Damping Ratio of Carbonate Sand-Steel Interface

Diffusive Surface Instabilities Induced by Electromechanical Loading

Numerical Study of Thermocapillary and Slip Effects on Interfacial Destabilization under Surface Acoustic Waves

Mechanical Behaviors of Interaction Between Coral Sand and Structure Surface

Adhesion of Elastic Wavy Surfaces: Interface Strengthening/weakening and Mode Transition Mechanisms

Constitutive Modelling of a Dry Sand–structure Interface under High-Frequency Vibration with a Constant Normal Load

Characterization of contact evolution on sand grain surfaces and their time-dependent contact properties based on Greenwood and Williamson model

A discrete element study on sand response to cyclic loading: macro-micro perspectives

Stiffness of sphere-plate contacts at MHz frequencies: dependence on normal load, oscillation amplitude, and ambient medium

Noise activated dissociation of soft elastic contacts

SANISAND-MS-T: Simple ANIsotropic SAND model with Memory Surface for Temperature effects

Direct Measurement of the Surface Tension of a Soft Elastic Hydrogel: Exploration of Elasto-Capillary Instability in Adhesion

Probing the micromechanics of a multi-contact interface at the onset of frictional sliding

Strain-dependent solid surface stress and the stiffness of soft contacts

Static and sliding contact of rough surfaces: effect of asperity-scale properties and long-range elastic interactions

Cyclic-loading effects in sand: a micromechanical study considering particle breakage

Influence of intermediate principal stress and rolling resistance on the shearing response of sand: a micromechanical investigation