Abstract:The prominent performance of wave elimination and energy absorption makes calcareous sand important and useful in infrastructure construction and protection engineering. Due to the high compressibility induced by remarkable intragranular void and irregular shape, calcareous sand presents different mechanical behaviors from common terrestrial sands. Considerable efforts have been made to explore the static and dynamic mechanical properties of calcareous sand. In this paper, a series of monotonous experiments have been performed on calcareous sand utilizing the electrohydraulic servo-controlled test apparatus designed by the Global Digital Systems Ltd (GDS). The effects of confining pressure and relative density on the mechanical properties of dry, drained, and undrained saturated sand were studied, and the underlying micromechanism of deformation and failure was discussed. It can be found that the residual stress of dry calcareous sand is independent of the relative density, while the peak stress and residual stress of drainage saturated sand have a positive correlation with the relative density. The increase of confining pressure makes the strain softening more remarkable and heightens the peak stress and residual stress. The stress-strain curve of calcareous sand can be divided into two portions: prepeak portion and postpeak softening portion. For the dry sand and drainage saturated sand, the softened part can be partitioned into three phases, i.e., accelerated phase, steady phase, and degradation phase, while the undrained saturated sand tends to hyperbolic softening. A mathematical model composed of a hyperbolic function and an inverted S-shaped function was formulated to describe the multiphase characteristic, in which the setting of parameter p expands its applicability. The experimental result validated the model, showing that the model can better describe the monotonic stress-strain relationship of calcareous sand. Besides, the physical meanings of model parameters were discussed.

SANISAND-MS-T: Simple ANIsotropic SAND model with Memory Surface for Temperature effects

Failure Mechanisms of Sand under Asymmetrical Cyclic Loading Conditions: Experimental Observation and Constitutive Modelling

Hypoplastic Modeling of Anisotropic Sand Behavior Accounting for Rotation of Principal Stress Direction

Discrete Element Modeling of Sand Behavior in a Biaxial Shear Test

Hypoplastic Model for Sand under Multidirectional Shearing Conditions Considering Fabric Change Effect

Effects of Initial Static Shear on Cyclic Resistance and Pore Pressure Generation of Saturated Sand

Discrete-Element Simulation of Dense Sand under Uni- and Bidirectional Cyclic Simple Shear Considering Initial Static Shear Effect

Multishear Bounding Surface Modelling of Anisotropic Sands Accounting for Fabric and Its Evolution

A Unified Thermo-Mechanical Bounding Surface Model for Saturated Clay and Sand

SANISAND‐C*: Simple ANIsotropic constitutive model for SAND with Cementation

SANISAND‐FN: An evolving fabric‐based sand model accounting for stress principal axes rotation

Micromechanics-based multimechanism bounding surface model for sands

SANISAND-H: A sand bounding surface model for high pressures

Experimental and Mathematical Modeling of Monotonic Behavior of Calcareous Sand

Modified SANISAND‐F model for simple shear path

A thermodynamic critical state model for sands

Permanent Deformation Characteristics of Saturated Sand under Cyclic Loading

A novel constitutive model of the anisotropic sand accounting for the fabric evolution

Three-dimensional multi-mechanism bounding surface model for sands

Study on Meso-Mechanical Behavior of Sand Based on Its 2D Geometrical Model

An Anisotropic Plasticity Model Incorporating Fabric Evolution for Monotonic and Cyclic Behavior of Sand