Abstract:Huge and critical structures, such as fuel storage tanks and nuclear power plants, are often built on dense sandy grounds, which may cause excessive plastic deformations under multidirectional cyclic shearing conditions caused by earthquakes. The lack of investigation of sand behavior under multidirectional loading may lead to unsafe designs, and thus significantly increase the maintenance cost for infrastructures during their long operational time, which might be longer than 100 years. This study presents a numerical investigation on the liquefaction behavior of dense sand under bidirectional cyclic simple shear using the discrete element method. The bidirectional cyclic simple shear tests with varying stress trajectories on the deviatoric stress plane, including figure-8, circular, and straight lines, were conducted. Additionally, a series of unidirectional loading tests was conducted in the simulation scheme for comparison purposes. The effect of the initial static shear on the cyclic behavior and liquefaction resistance of granular materials was examined. Four loading categories, including full reversal, partial reversal, intermediate reversal, and no reversal, were implemented in the numerical simulations. Although the presence of the initial static shear may enhance the cyclic resistance of granular samples under unidirectional loading, it mitigates the liquefaction resistance and promotes the failure of specimens under bidirectional shearing conditions. The microscopic analysis was performed to reveal the relationship between the fabric evolution and external loading, which can provide profound insights into the underlying mechanism of the cyclic behavior and liquefaction susceptibility of granular material when both the bidirectional shearing and initial static shear effects are considered.

Discrete Element Modeling of Sand Behavior in a Biaxial Shear Test

Discrete-Element Simulation of Dense Sand under Uni- and Bidirectional Cyclic Simple Shear Considering Initial Static Shear Effect

Undrained Responses of Anisotropic Granular Material under Rotational Shear by DEM

Discrete Element Simulations of Drained Granular Material Response under Multidirectional Rotational Shear

Undrained Cyclic Behavior of Granular Materials Considering Initial Static Shear Effect: Insights from Discrete Element Modeling

Bimodal Character of Induced Anisotropy in Granular Materials under Undrained Shear

Study on the Mechanical Behavior of Sands Using 3D Discrete Element Method with Realistic Particle Models

DEM Investigations of the Influence of Particle Crushing on the Shear Properties of Sands

A discrete element study on sand response to cyclic loading: macro-micro perspectives

Modeling shear behavior and strain localization in cemented sands by two-dimensional distinct element method analyses

DEM-aided Direct Shear Testing of Granular Sands Incorporating Realistic Particle Shape

Modeling Shear Behavior of Sand-Clay Interfaces Through Two-Dimensional Distinct Element Method Analysis

Study on Meso-Mechanical Behavior of Sand Based on Its 2D Geometrical Model

EXPERIMENT AND DISCRETE ELEMENT NUMERICAL SIMULATION FOR INFLUENCE OF PARTICLE MORPHOLOGY ON SHEAR STRENGTH OF SAND

Discrete element simulation of cyclic simple shear behavior of sandy soil with constant amplitude of shear strain

Strain Localization Analyses of Idealized Sands in Biaxial Tests by Distinct Element Method

DEM modeling direct shearing behavior of sand considering anti-rotation of particle

Exploring Macro-and Micro-Scale Responses of Sand in Direct Shear Tests by Numerical Simulations Using Non-Circular Particles

Ring Shear Mechanical Properties and Numerical Simulation of Sand

DEM Investigation on the Evolution of Microstructure in Granular Soils under Shearing

Discrete Element Simulation of Mechanical Characteristic of Conditioned Sands in Earth Pressure Balance Shield Tunneling