Abstract:We propose a hierarchical multiscale modeling approach to simulate the hydro-mechanical coupling behavior in saturated high-porosity sandstone, with a particular focus on the occurrence and transition of compaction bands. In this multiscale approach, we use the finite element method (FEM) to solve the global boundary value problem for a sandstone, and the discrete element method (DEM) to solve the local representative volume elements (RVEs) embedded at the Gauss integration points of the FE mesh to provide the effective material constitutive responses required for FEM. The global governing equations for a coupled hydro-mechanical problem are solved with the standard u–p formulation, where the total stress is decomposed into the pore pressure and the effective stress which is directly derivable from the DEM solution of the RVEs, according to the seminal Terzaghi's effective stress principle. By choosing proper RVEs to represent the typical microstructure of high-porosity sandstone, we perform both drained and undrained simulations on saturated sandstone specimens to examine localized compactive failures developed therein. We identify that both mean effective stress and porosity control critically the initiation and development of failure modes in sandstone. Under undrained shear, our simulations show that a sandstone specimen may first develop a compaction band followed by a gradual transition to a shear-enhanced compaction band and even shear band, with the build-up of excessive pore pressure and hence drop of mean effective stress. In the specimen, regions experiencing localized volumetric contraction show relatively higher pore pressure than other regions and act as the source of flux flow. The Darcy flux peaks during the formation of compaction band and decreases gradually in the following stages. To distinguish the different failure stages with distinct physical attributes, the ratio of deviatoric strain to volumetric strain is adopted as a useful indicator signifying the underlying microstructural mechanisms for different deformation bands. This study signifies the importance of considering pore pressure and mean effective stress in fluid-involved engineering operations, e.g. aquifer management, hydrocarbon extraction and CO2 geological sequestration.

Three-dimensional discrete element modeling of the shear behavior of cemented hydrate-bearing sands

Discrete Element Modeling of Sand Behavior in a Biaxial Shear Test

Discrete-Element Simulation of Dense Sand under Uni- and Bidirectional Cyclic Simple Shear Considering Initial Static Shear Effect

Multiscale Modeling and Analysis of Compaction Bands in High-Porosity Sandstones

DEM investigation of the effect of hydrate morphology on the mechanical properties of hydrate-bearing sands

DEM Simulation of the Undrained Shear Behavior of Sand Containing Dissociated Gas Hydrate

Modeling strength characteristics of hydrate-bearing sediments based on discrete element method

A DEM-based Generic Modeling Framework for Hydrate-Bearing Sediments

A numerical investigation on the mechanical properties of hydrate-bearing sand using Distinct Element Method

Investigation of the effect of cementing ratio on the mechanical properties and strain location of hydrate-bearing sediments by using DEM

DEM Study on the Undrained Mechanical Behavior of Gassy Sand

Numerical Simulation of Direct Shear Tests on Gas Hydrate-Bearing Sediments Using the Discrete Element Method

Discrete Element Modeling of the Effect of Hydrate Distribution Heterogeneity on the Mechanical Behavior of Cemented Hydrate-Bearing Sediments

Stress-strain response and deformation behavior of hydrate-bearing sands under different grain sizes: A particle-scale study using DEM

A discrete element simulation considering liquid bridge force to investigate the mechanical behaviors of methane hydrate-bearing clayey silt sediments

Effects of hydrate occurring mechanisms and saturation on the mechanical properties of hydrate-bearing sediments: Numerical study based on simplified DEM simulation

DEM analyses of cemented hydrate’s effect on the compression behavior of fine-grained sediments

A State-Dependent Constitutive Model for Gas Hydrate-Bearing Sediment Incorporating Phase Change

DEM Simulations of the Creep Behavior of Cemented Methane Hydrate-Bearing Sand

Deformation mechanisms of coexistence type methane hydrate-bearing sands: A particulate-scale investigation

Influences of hydrate morphology and hydrate distribution heterogeneity on the mechanical properties of hydrate-bearing sediments using the discrete element method