Abstract:Natural gas hydrates have been paid increasing attention as a promising future alternative to the traditional fossil energies. In nature, natural gas hydrates form in submarine sediments and permafrost, so the influences of natural gas hydrates on soil should be understood for the safe and efficient recovery. To date, we still have limited understanding of properties of natural gas hydrate-bearing soil under the zero-horizontal-displacement condition (oedometer test condition). Therefore, to make up for the knowledge gap, oedometer tests of natural gas hydrate-bearing sands are numerically simulated by the discrete element method (DEM) which has an advantage over the laboratory tests in terms of accurately controlling the hydrate saturation and morphology. Firstly, the contact/cementation relationships among sand particles, hydrates, setup cell walls and loading plates are analyzed, based on which we further propose the particle-scale mechanical models for natural gas hydrate-bearing sands by using basic mechanical units to equivalently represent different interactions, i. e., springs for the elasticity, dampers for the viscosity, contact button for contact status and slip button for slipping status. We also propose and elaborate the preparation methods of numerical samples with different hydrate saturation and morphology. Results show that the presence of natural gas hydrates in sands decreases the effects of loading on the confined modulus and earth pressure coefficient at rest, and the increase of hydrate saturation results in the increase of confined modulus and internal friction angle but the decrease of earth pressure coefficient at rest and Poisson's ratio. Moreover, it is found that patchy hydrates have more significant effects on the soil properties than the loading-bearing hydrates do, in terms of the confined modulus, earth pressure coefficient at rest, Poisson's ratio and internal friction angle. This study is beneficial to the deformation prediction/control during the extraction of natural gas hydrates.

DEM Simulation of the Undrained Shear Behavior of Sand Containing Dissociated Gas Hydrate

Discrete-Element Simulation of Dense Sand under Uni- and Bidirectional Cyclic Simple Shear Considering Initial Static Shear Effect

Discrete Element Modeling of Sand Behavior in a Biaxial Shear Test

DEM Study on the Undrained Mechanical Behavior of Gassy Sand

Oedometer Test of Natural Gas Hydrate-Bearing Sands: Particle-scale Simulation

Three-dimensional discrete element modeling of the shear behavior of cemented hydrate-bearing sands

A numerical investigation on the mechanical properties of hydrate-bearing sand using Distinct Element Method

Investigation of Particle-Scale Mechanical Behavior of Hydrate-Bearing Sands Using DEM: Focus on Hydrate Habits

Stress-strain response and deformation behavior of hydrate-bearing sands under different grain sizes: A particle-scale study using DEM

DEM investigation of the effect of hydrate morphology on the mechanical properties of hydrate-bearing sands

A State-Dependent Constitutive Model for Coarse-Grained Gassy Soil and Its Application in Slope Instability Modelling

Numerical Simulation of Direct Shear Tests on Gas Hydrate-Bearing Sediments Using the Discrete Element Method

A State-Dependent Constitutive Model for Gas Hydrate-Bearing Sediment Incorporating Phase Change

A Particle-Scale Study of the Triaxial Compression Behavior of Methane Hydrate-Bearing Sands

Study on the shear mechanics of gas hydrate-bearing sand-well interface with different roughness and dissociation

DEM Simulations of the Creep Behavior of Cemented Methane Hydrate-Bearing Sand

Influence of Gas Hydrate Dissociation on Submarine Slope Stability Under the Undrained Condition

Effect of Hydrate Distribution on the Mechanical Response of Hydrate-Bearing Sand: Discrete Element Method Simulation

DEM simulation of sand liquefaction under partially drained conditions

A discrete element simulation considering liquid bridge force to investigate the mechanical behaviors of methane hydrate-bearing clayey silt sediments

Microstructure evolution of hydrate‐bearing sands during thermal dissociation and ensued impacts on the mechanical and seepage characteristics