Abstract:We propose a hierarchical multiscale modeling approach to simulate the hydro-mechanical coupling behavior in saturated high-porosity sandstone, with a particular focus on the occurrence and transition of compaction bands. In this multiscale approach, we use the finite element method (FEM) to solve the global boundary value problem for a sandstone, and the discrete element method (DEM) to solve the local representative volume elements (RVEs) embedded at the Gauss integration points of the FE mesh to provide the effective material constitutive responses required for FEM. The global governing equations for a coupled hydro-mechanical problem are solved with the standard u–p formulation, where the total stress is decomposed into the pore pressure and the effective stress which is directly derivable from the DEM solution of the RVEs, according to the seminal Terzaghi's effective stress principle. By choosing proper RVEs to represent the typical microstructure of high-porosity sandstone, we perform both drained and undrained simulations on saturated sandstone specimens to examine localized compactive failures developed therein. We identify that both mean effective stress and porosity control critically the initiation and development of failure modes in sandstone. Under undrained shear, our simulations show that a sandstone specimen may first develop a compaction band followed by a gradual transition to a shear-enhanced compaction band and even shear band, with the build-up of excessive pore pressure and hence drop of mean effective stress. In the specimen, regions experiencing localized volumetric contraction show relatively higher pore pressure than other regions and act as the source of flux flow. The Darcy flux peaks during the formation of compaction band and decreases gradually in the following stages. To distinguish the different failure stages with distinct physical attributes, the ratio of deviatoric strain to volumetric strain is adopted as a useful indicator signifying the underlying microstructural mechanisms for different deformation bands. This study signifies the importance of considering pore pressure and mean effective stress in fluid-involved engineering operations, e.g. aquifer management, hydrocarbon extraction and CO2 geological sequestration.

DEM Simulations of the Creep Behavior of Cemented Methane Hydrate-Bearing Sand

Multiscale Modeling and Analysis of Compaction Bands in High-Porosity Sandstones

Deformation mechanisms of coexistence type methane hydrate-bearing sands: A particulate-scale investigation

A State-Dependent Constitutive Model for Gas Hydrate-Bearing Sediment Incorporating Phase Change

Investigation of the effect of cementing ratio on the mechanical properties and strain location of hydrate-bearing sediments by using DEM

A bounding surface plasticity model for methane hydrate-bearing sediments in deep seabed

A discrete element simulation considering liquid bridge force to investigate the mechanical behaviors of methane hydrate-bearing clayey silt sediments

A numerical investigation on the mechanical properties of hydrate-bearing sand using Distinct Element Method

A bounding surface model of methane hydrate-bearing carbonate sand-silt mixtures

Strength and creep characteristics of methane hydrate-bearing clayey silts of the South China Sea

DEM Simulation of the Undrained Shear Behavior of Sand Containing Dissociated Gas Hydrate

Study on creep behaviors and nonlinear creep constitutive model for sandy marine hydrate-bearing sediments

Effect of Hydrate Distribution on the Mechanical Response of Hydrate-Bearing Sand: Discrete Element Method Simulation

Three-dimensional discrete element modeling of the shear behavior of cemented hydrate-bearing sands

DEM Simulation of Creep in One-Dimensional Compression of Crushable Sand

DEM analyses of cemented hydrate’s effect on the compression behavior of fine-grained sediments

Creep behavior of dry and saturated medium-grain sandstone and its relationship with conventional mechanical properties

Stress-strain response and deformation behavior of hydrate-bearing sands under different grain sizes: A particle-scale study using DEM

DEM Study on the Undrained Mechanical Behavior of Gassy Sand

A State-Dependent Elasto-Plastic Model for Hydrate-Bearing Cemented Sand Considering Damage and Cementation Effects