Abstract:The gas hydrates in the pore space constitutionally affect the mechanical properties of gas hydrate-bearing sediments. The hydrates contribute to the mechanical properties of hydrate-bearing sediments by densifying, bearing and bonding effects. A discrete element model of hydrate-bearing silt was established by randomly filling hydrate particles into a silt-sized granular skeleton reservoir. Three ideal types of hydrate-bearing silt, namely, distributed particulate hydrate-bearing silt (type I), cluster hydrate-bearing silt (type II) and cemented cluster hydrate-bearing silt (type III) are proposed to study the mechanical effects of hydrate. One-dimensional loading (oedometer test) was applied to the numerical sample to investigate its stress evolution, volume change, bond degradation, coordination condition and stress transmission. The main conclusions are as follows. Type III sample exhibits a convex stress path due to bonding and then the stress path gradually returns to the pseudo linear stress path of type I sample due to bond breakage. The compression curve for the type II or type III sample exhibits a structural yield stress, which corresponds to abrupt bond breakage; the compression curves for types I, II and III evolve to be approximately coincident with each other at the end of compression. The average coordination number Z in type II or type III is approximately constant before widespread bond breakage, and then it will evolve to the curve of type I; the inflexion stress of the coordination numbers corresponds to the structural yield stress. The greatest magnitude of the mean stress bearing by hydrates in type II or type III sample is near the structural yield stress; the mean stresses ps - hb$$p_{{\text{s - h}}}^{{\text{b}}}$$ and ph - hb$$p_{{\text{h - h}}}^{{\text{b}}}$$ (created by bonded silt-hydrate and hydrate-hydrate contacts, respectively) in type III sample first increase under compression and then decrease due to widespread bond breakage, and they are exceeded by ps - hu$$p_{{\text{s - h}}}^{{\text{u}}}$$ and ph - hu$$p_{{\text{h - h}}}^{{\text{u}}}$$ (created by unbonded silt-hydrate and hydrate-hydrate contacts, respectively) after reaching the structural yield stress.

A discrete element simulation considering liquid bridge force to investigate the mechanical behaviors of methane hydrate-bearing clayey silt sediments

Mechanical behavior of clayey methane hydrate-bearing sediment: Effects of pore size and physicochemical characteristics using a novel DEM contact model

Numerical Simulation of Direct Shear Tests on Gas Hydrate-Bearing Sediments Using the Discrete Element Method

Modeling strength characteristics of hydrate-bearing sediments based on discrete element method

Mechanical behaviors of natural gas hydrate-bearing clayey-silty sediments: Experiments and constitutive modeling

Effects of hydrate occurring mechanisms and saturation on the mechanical properties of hydrate-bearing sediments: Numerical study based on simplified DEM simulation

Investigation of the effect of cementing ratio on the mechanical properties and strain location of hydrate-bearing sediments by using DEM

Undrained triaxial tests on water-saturated methane hydrate–bearing clayey-silty sediments of the South China Sea

A numerical investigation on the mechanical properties of hydrate-bearing sand using Distinct Element Method

Effect of Hydrate Distribution on the Mechanical Response of Hydrate-Bearing Sand: Discrete Element Method Simulation

Mechanical Behaviours of Gas-Hydrate-bearing Clayey Sediments of the South China Sea

A State-Dependent Constitutive Model for Gas Hydrate-Bearing Sediment Incorporating Phase Change

Effect of clay type and content on the mechanical properties of clayey silt hydrate sediments

DEM analyses of cemented hydrate’s effect on the compression behavior of fine-grained sediments

Geomechanical Properties of Deep-Sea Pore-Filled Methane Hydrate-Bearing Soils at Critical State Using DEM Analysis

Influence of hydrate participation on the mechanical behaviour of fine-grained sediments under one-dimensional compression: a DEM study

DEM investigation of the effect of hydrate morphology on the mechanical properties of hydrate-bearing sands

Discrete Element Modeling of the Effect of Particle Size Distribution on Direct Shear Behavior of Hydrate-Bearing Sediments

Influences of hydrate morphology and hydrate distribution heterogeneity on the mechanical properties of hydrate-bearing sediments using the discrete element method

Stress-strain response and deformation behavior of hydrate-bearing sands under different grain sizes: A particle-scale study using DEM

Discrete Element Modeling of the Effect of Hydrate Distribution Heterogeneity on the Mechanical Behavior of Cemented Hydrate-Bearing Sediments