Abstract:To gain a deeper understanding of the fundamental characteristics of internal forces and deformations in the directional distribution of granular materials, it is necessary to investigate the directional distribution of particles on the mechanical properties and microstructural evolution process of the soil. The discrete element particle flow program PFC 3D is used to construct the particle with the same aspect ratio, convexity, and sphericity as the binary images, and the specimens with directional particle distributions of 0°, 30°, 45°, 60°, and 90° are generated. Furthermore, the quantitative correlations between the constitutive parameters and the deposition angle are examined. The results show that the shear strength and shear expansion of the soil increase with increasing deposition angle. With an increase in axial strain, the dominant direction of contact points and the direction of force chain and normal contact force rotate counterclockwise. In the critical state, the microstructural direction of the specimens with different deposition angles is approximately the same, which is primarily along the direction of 45° + φ cs . The critical friction angle decays as a power function with the increase of deposition angle in undrained tests. The critical void ratios of the specimens with different deposition angles under drained tests decay linearly as the deposition angle increases. The critical mechanical coordination number decays exponentially with an increase in deposition angle under undrained tests. The conclusions mentioned above serve as a guide for revising the constitutive equations for specimens considering the microscopic behavior.

Influence of intermediate principal stress and rolling resistance on the shearing response of sand: a micromechanical investigation

Discrete Element Modeling of Sand Behavior in a Biaxial Shear Test

Particle Shape Effects on the Shear Behaviors of Granular Assemblies: Irregularity and Elongation

Undrained Responses of Anisotropic Granular Material under Rotational Shear by DEM

The Influence of Particles' Aspect Ratio on the Shear Behaviour of Granular Materials

Shear Behaviour of Sand-Rubber Mixtures: Interpretation from Energy Transformation and Force Chain Evolution

Discrete Element Simulations of Drained Granular Material Response under Multidirectional Rotational Shear

Rotational Resistance and Shear-Induced Anisotropy in Granular Media

Micromechanical Investigation of the Shear Behaviors of Sand‒rubber Mixtures Using a Multibody Meshfree Method

The Influence of Particle Elongations on Direct Shear Behaviour of Granular Materials Using DEM

Effect of Rolling Resistance Model Parameters on 3D DEM Modeling of Coarse Sand Direct Shear Test

A discrete element study on sand response to cyclic loading: macro-micro perspectives

Coupled effects of particle overall regularity and sliding friction on the shear behavior of uniformly graded dense sands

Study on the Meso-Structure Development in Direct Shear Tests of A Granular Material

3d Dem Insights Into The Effect Of Particle Overall Regularity On Macro And Micro Mechanical Behaviours Of Dense Sands

Effect of Particle Morphology on Stiffness, Strength and Volumetric Behavior of Rounded and Angular Natural Sand

Micromechanism study on the influence of particle deposition angle on mechanical properties of sand

Systematic investigation into the role of particle multi-level morphology in determining the shear behavior of granular materials via DEM simulation

EXPERIMENT AND DISCRETE ELEMENT NUMERICAL SIMULATION FOR INFLUENCE OF PARTICLE MORPHOLOGY ON SHEAR STRENGTH OF SAND

Micromechanical Investigation of the Particle Size Effect on the Shear Strength of Uncrushable Granular Materials

Influence of Particle Rotation on the Shear Characteristics of Calcareous-Sand and Silica-Bead Granular Materials