Abstract:Huge and critical structures, such as fuel storage tanks and nuclear power plants, are often built on dense sandy grounds, which may cause excessive plastic deformations under multidirectional cyclic shearing conditions caused by earthquakes. The lack of investigation of sand behavior under multidirectional loading may lead to unsafe designs, and thus significantly increase the maintenance cost for infrastructures during their long operational time, which might be longer than 100 years. This study presents a numerical investigation on the liquefaction behavior of dense sand under bidirectional cyclic simple shear using the discrete element method. The bidirectional cyclic simple shear tests with varying stress trajectories on the deviatoric stress plane, including figure-8, circular, and straight lines, were conducted. Additionally, a series of unidirectional loading tests was conducted in the simulation scheme for comparison purposes. The effect of the initial static shear on the cyclic behavior and liquefaction resistance of granular materials was examined. Four loading categories, including full reversal, partial reversal, intermediate reversal, and no reversal, were implemented in the numerical simulations. Although the presence of the initial static shear may enhance the cyclic resistance of granular samples under unidirectional loading, it mitigates the liquefaction resistance and promotes the failure of specimens under bidirectional shearing conditions. The microscopic analysis was performed to reveal the relationship between the fabric evolution and external loading, which can provide profound insights into the underlying mechanism of the cyclic behavior and liquefaction susceptibility of granular material when both the bidirectional shearing and initial static shear effects are considered.

A discrete element study on sand response to cyclic loading: macro-micro perspectives

Discrete Element Modeling of Sand Behavior in a Biaxial Shear Test

Failure Mechanisms of Sand under Asymmetrical Cyclic Loading Conditions: Experimental Observation and Constitutive Modelling

Undrained Responses of Anisotropic Granular Material under Rotational Shear by DEM

Discrete-Element Simulation of Dense Sand under Uni- and Bidirectional Cyclic Simple Shear Considering Initial Static Shear Effect

Energy-Based Approach to Quantify Cyclic Resistance and Pore Pressure Generation in Anisotropically Consolidated Sand

A Multiscale Investigation of Strain Localization in Cohesionless Sand

Undrained Cyclic Behavior of Granular Materials Considering Initial Static Shear Effect: Insights from Discrete Element Modeling

Advancing Understanding of the Influence of Drained Cyclic Loading on Sand Behavior Using DEM

Cyclic-loading effects in sand: a micromechanical study considering particle breakage

Effect of Rolling Resistance Model Parameters on 3D DEM Modeling of Coarse Sand Direct Shear Test

Influence of intermediate principal stress and rolling resistance on the shearing response of sand: a micromechanical investigation

Study on the Mechanical Behavior of Sands Using 3D Discrete Element Method with Realistic Particle Models

Study on Meso-Mechanical Behavior of Sand Based on Its 2D Geometrical Model

Mechanical Properties and DEM-Based Simulation of Double-Fractured Sandstone under Cyclic Loading and Unloading

Analyzing cyclic shear behavior at the sand–rough concrete interface: An experimental and DEM study across varying displacement amplitudes

Exploring the Macroscopic Behavior and Microstructure Evolution of Lightly Cemented Sand in the Post-Liquefaction Process Using DEM

DEM investigation of strain behaviour and force chain evolution of gravel–sand mixtures subjected to cyclic loading

Grain-Level Numerical Simulations for the Effective Elasticity of Weakly Cemented Sandstones

Undrained Cyclic Response and Resistance of Saturated Calcareous Sand considering Initial Static Shear Effect

Laboratory Observation and Micromechanics-Based Modelling of Sandstone on Different Scales