Abstract:We propose a hierarchical multiscale modeling approach to simulate the hydro-mechanical coupling behavior in saturated high-porosity sandstone, with a particular focus on the occurrence and transition of compaction bands. In this multiscale approach, we use the finite element method (FEM) to solve the global boundary value problem for a sandstone, and the discrete element method (DEM) to solve the local representative volume elements (RVEs) embedded at the Gauss integration points of the FE mesh to provide the effective material constitutive responses required for FEM. The global governing equations for a coupled hydro-mechanical problem are solved with the standard u–p formulation, where the total stress is decomposed into the pore pressure and the effective stress which is directly derivable from the DEM solution of the RVEs, according to the seminal Terzaghi's effective stress principle. By choosing proper RVEs to represent the typical microstructure of high-porosity sandstone, we perform both drained and undrained simulations on saturated sandstone specimens to examine localized compactive failures developed therein. We identify that both mean effective stress and porosity control critically the initiation and development of failure modes in sandstone. Under undrained shear, our simulations show that a sandstone specimen may first develop a compaction band followed by a gradual transition to a shear-enhanced compaction band and even shear band, with the build-up of excessive pore pressure and hence drop of mean effective stress. In the specimen, regions experiencing localized volumetric contraction show relatively higher pore pressure than other regions and act as the source of flux flow. The Darcy flux peaks during the formation of compaction band and decreases gradually in the following stages. To distinguish the different failure stages with distinct physical attributes, the ratio of deviatoric strain to volumetric strain is adopted as a useful indicator signifying the underlying microstructural mechanisms for different deformation bands. This study signifies the importance of considering pore pressure and mean effective stress in fluid-involved engineering operations, e.g. aquifer management, hydrocarbon extraction and CO2 geological sequestration.

Grain-Level Numerical Simulations for the Effective Elasticity of Weakly Cemented Sandstones

Discrete Element Modeling of Sand Behavior in a Biaxial Shear Test

Multiscale Modeling and Analysis of Compaction Bands in High-Porosity Sandstones

A Multiscale Investigation of Strain Localization in Cohesionless Sand

Undrained Cyclic Behavior of Granular Materials Considering Initial Static Shear Effect: Insights from Discrete Element Modeling

Discrete-Element Simulation of Dense Sand under Uni- and Bidirectional Cyclic Simple Shear Considering Initial Static Shear Effect

Undrained Responses of Anisotropic Granular Material under Rotational Shear by DEM

Diffuse Instability of Granular Material under Various Drainage Conditions: Discrete Element Simulation and Constitutive Modeling

A discrete element study on sand response to cyclic loading: macro-micro perspectives

Numerical simulation of compacted failure in porous sandstone based on discrete element method

Study on the Mechanical Behavior of Sands Using 3D Discrete Element Method with Realistic Particle Models

Exploring Packing Density, Critical State, and Liquefaction Resistance of Sand-Fines Mixture Using DEM

Exploring the Macroscopic Behavior and Microstructure Evolution of Lightly Cemented Sand in the Post-Liquefaction Process Using DEM

Discrete-Element Modeling of Cemented Granular Material Using Mixed-Mode Cohesive Zone Model

Effective Elastic Properties and Micro-mechanical Damage Evolution of Composite Granular Rocks: Insights from Particulate Discrete Element Modelling

Numerical modelling of sandstone uniaxial compression test using a mix-mode cohesive fracture model

Small-strain Shear Moduli Modeling of Sand: a Non-Equilibrium Thermodynamic Approach, Including an Application to Leighton Buzzard Sand

EXPERIMENT AND DISCRETE ELEMENT NUMERICAL SIMULATION FOR INFLUENCE OF PARTICLE MORPHOLOGY ON SHEAR STRENGTH OF SAND

DEM investigation of strain behaviour and force chain evolution of gravel–sand mixtures subjected to cyclic loading

Study on Meso-Mechanical Behavior of Sand Based on Its 2D Geometrical Model

Three-dimensional discrete element modeling of the shear behavior of cemented hydrate-bearing sands