Abstract:This paper presents a multiscale analysis of the classical borehole instability problem in high‐porosity sandstones using a hierarchical multiscale approach. A rigorous, two‐way message‐passing coupling of finite element method and discrete element method is employed, where the finite element method is employed to solve a boundary value problem and the constitutive material responses required at each of its integration points are derived by the discrete element method solution to an embedded representative volume element instead of by using an assumed phenomenological model. We employ this multiscale approach to examine the successive failure of a borehole subjected to gradually decreased support stresses at the inner borehole wall or increased far‐field stresses. To reproduce the material behavior of high‐porosity sandstone, representative volume elements with a high‐porosity structure and interparticle bonds are generated. It is found that stress concentration triggers the initial failure at the borehole wall, and the subsequent failure in form of deformation bands is driven by further stress concentration ahead of the band tips. The failure pattern around the borehole varies with initial stress state and global loading path. The comparison of the local stress paths of the initial failure points in various cases reveals that the change of failure pattern from shear failure to mixed‐mode failure and to compaction failure is dominated by the increased mean stress. Cross‐scale parametric studies show that the failure mode changes from clear compaction bands to multiple arrays of shear bands by changing the high‐porosity specimen to a low‐porosity one. The increase in cohesion strength expands the yield locus and enlarges the critical mean stress between different failure patterns. Hence, the failure mode may change from compaction failure to mixed‐mode failure or from mixed‐mode failure to shear failure due purely to the increased cohesion strength. The qualitative comparisons indicate greater length, larger area, and more severe damage of the diametrically opposite failure with the increase in minor principal stress σ0 and principal stress ratio. The diametrically opposite failure mode is found a good indicator for σ0 direction, but it may also occur under hydrostatic far‐field stress due to material anisotropy.

Numerical simulation of compacted failure in porous sandstone based on discrete element method

Multiscale Modeling and Analysis of Compaction Bands in High-Porosity Sandstones

Discrete Element Modeling of Sand Behavior in a Biaxial Shear Test

Multiscale Insights into Borehole Instabilities in High‐Porosity Sandstones

Discrete-Element Simulation of Dense Sand under Uni- and Bidirectional Cyclic Simple Shear Considering Initial Static Shear Effect

Three-dimensional Discrete Element Simulation of the Triaxial Cyclic Loading of Sandstone Based on a Nonlinear Parallel-Bonded Stress Corrosion Model

Mechanism of formation of wiggly compaction bands in porous sandstone: 1. Observations and conceptual model

A discrete element model for the development of compaction localization in granular rock

Numerical simulation of strength and failure analysis of heterogeneous sandstone under different loading rates

Numerical simulation of mechanical compaction and pore evolution of sandstone considering particle breakage

Numerical Simulation of Stone Column Replacement by Consecutive Dynamic Compaction in Soft Ground

Grain-Level Numerical Simulations for the Effective Elasticity of Weakly Cemented Sandstones

Numerical simulation of EPB tunnel face instability in dry sand by discrete element method

DEM–FEM Analysis of Soil Failure Process Via the Separate Edge Coupling Method

A hybrid finite-discrete element method for modelling cracking processes in sandy mudstone containing a single edge-flaw under cyclic dynamic loading

Coupled CFD–DEM numerical modelling of perforation damage and sand production in weak sandstone formation

Numerical modelling of sandstone uniaxial compression test using a mix-mode cohesive fracture model

DEM Modeling of Particle Breakage in Silica Sands under One-Dimensional Compression

Numerical study on sandstone strength and failure characteristics with heterogeneous structure

A New Approach to DEM Simulation of Sand Production

Discrete Element Modelling of a Soil-Rock Mixture Used in an Embankment Dam