Abstract:This paper presents a multiscale analysis of the classical borehole instability problem in high‐porosity sandstones using a hierarchical multiscale approach. A rigorous, two‐way message‐passing coupling of finite element method and discrete element method is employed, where the finite element method is employed to solve a boundary value problem and the constitutive material responses required at each of its integration points are derived by the discrete element method solution to an embedded representative volume element instead of by using an assumed phenomenological model. We employ this multiscale approach to examine the successive failure of a borehole subjected to gradually decreased support stresses at the inner borehole wall or increased far‐field stresses. To reproduce the material behavior of high‐porosity sandstone, representative volume elements with a high‐porosity structure and interparticle bonds are generated. It is found that stress concentration triggers the initial failure at the borehole wall, and the subsequent failure in form of deformation bands is driven by further stress concentration ahead of the band tips. The failure pattern around the borehole varies with initial stress state and global loading path. The comparison of the local stress paths of the initial failure points in various cases reveals that the change of failure pattern from shear failure to mixed‐mode failure and to compaction failure is dominated by the increased mean stress. Cross‐scale parametric studies show that the failure mode changes from clear compaction bands to multiple arrays of shear bands by changing the high‐porosity specimen to a low‐porosity one. The increase in cohesion strength expands the yield locus and enlarges the critical mean stress between different failure patterns. Hence, the failure mode may change from compaction failure to mixed‐mode failure or from mixed‐mode failure to shear failure due purely to the increased cohesion strength. The qualitative comparisons indicate greater length, larger area, and more severe damage of the diametrically opposite failure with the increase in minor principal stress σ0 and principal stress ratio. The diametrically opposite failure mode is found a good indicator for σ0 direction, but it may also occur under hydrostatic far‐field stress due to material anisotropy.

A New Approach to DEM Simulation of Sand Production

Multiscale Modeling and Analysis of Compaction Bands in High-Porosity Sandstones

Discrete Element Modeling of Sand Behavior in a Biaxial Shear Test

Multiscale Insights into Borehole Instabilities in High‐Porosity Sandstones

Three-Dimensional DEM Simulation of Plugging Behaviour of Small-Diameter Open-Ended Model Piles Penetrating Into Sand

A Multiscale Investigation of Strain Localization in Cohesionless Sand

Numerical investigation of sand production mechanisms in weak sandstone formations with various reservoir fluids

Coupled CFD–DEM numerical modelling of perforation damage and sand production in weak sandstone formation

Numerical simulations of sand production in oil wells using the CFD-DEM-IBM approach

Microscopic sand production simulation and visual sanding pattern description in weakly consolidated sandstone reservoirs

Development and experimental validation of a computational fluid dynamics-discrete element method sand production model

Modeling of Sand Particle Crushing in Split Hopkinson Pressure Bar Tests Using the Discrete Element Method

A resolved CFD-DEM investigation into sand production under water flooding in unconsolidated reservoir

Pressure Behavior Analysis of Permeability Changes Due to Sand Production in Offshore Loose Sandstone Reservoirs Using Boundary-Element Method

DEM Modeling of Particle Breakage in Silica Sands under One-Dimensional Compression

Analysis of Damage and Permeability Evolution of Sandstone under Compression Deformation

Micromechanism of Sand Production in the Process of Hydrate Exploitation on Depressurization in Sandy Reservoirs: A Coupled Fluid-Solid Modeling

A discrete element study on sand response to cyclic loading: macro-micro perspectives

Numerical simulation of EPB tunnel face instability in dry sand by discrete element method

Study on the Mechanical Behavior of Sands Using 3D Discrete Element Method with Realistic Particle Models

Study on Meso-Mechanical Behavior of Sand Based on Its 2D Geometrical Model