Abstract:We propose a hierarchical multiscale modeling approach to simulate the hydro-mechanical coupling behavior in saturated high-porosity sandstone, with a particular focus on the occurrence and transition of compaction bands. In this multiscale approach, we use the finite element method (FEM) to solve the global boundary value problem for a sandstone, and the discrete element method (DEM) to solve the local representative volume elements (RVEs) embedded at the Gauss integration points of the FE mesh to provide the effective material constitutive responses required for FEM. The global governing equations for a coupled hydro-mechanical problem are solved with the standard u–p formulation, where the total stress is decomposed into the pore pressure and the effective stress which is directly derivable from the DEM solution of the RVEs, according to the seminal Terzaghi's effective stress principle. By choosing proper RVEs to represent the typical microstructure of high-porosity sandstone, we perform both drained and undrained simulations on saturated sandstone specimens to examine localized compactive failures developed therein. We identify that both mean effective stress and porosity control critically the initiation and development of failure modes in sandstone. Under undrained shear, our simulations show that a sandstone specimen may first develop a compaction band followed by a gradual transition to a shear-enhanced compaction band and even shear band, with the build-up of excessive pore pressure and hence drop of mean effective stress. In the specimen, regions experiencing localized volumetric contraction show relatively higher pore pressure than other regions and act as the source of flux flow. The Darcy flux peaks during the formation of compaction band and decreases gradually in the following stages. To distinguish the different failure stages with distinct physical attributes, the ratio of deviatoric strain to volumetric strain is adopted as a useful indicator signifying the underlying microstructural mechanisms for different deformation bands. This study signifies the importance of considering pore pressure and mean effective stress in fluid-involved engineering operations, e.g. aquifer management, hydrocarbon extraction and CO2 geological sequestration.

Micromechanism of Sand Production in the Process of Hydrate Exploitation on Depressurization in Sandy Reservoirs: A Coupled Fluid-Solid Modeling

Multiscale Modeling and Analysis of Compaction Bands in High-Porosity Sandstones

One-dimensional Analytical Model for Thermo-Hydro-mechanical Coupling Behaviour of Hydrates Overlying Layer During Gas Production

Numerical simulation on sand production in the exploitation process of gas hydrates based on skeleton failure of reservoirs

STUDY ON SAND PRODUCTION IN A NATURAL GAS HYDRATE PRODUCTION WELL

Influence of Sand Production in an Unconsolidated Sandstone Reservoir in a Deepwater Gas Field

Experimental study on solid particle migration and production behaviors during marine natural gas hydrate dissociation by depressurization

Sand production by hydraulic erosion during multicycle steam stimulation: An analytical study

Experimental Study on the Transport Behavior of Micron-Sized Sand Particles in a Wellbore

A State-Dependent Constitutive Model for Coarse-Grained Gassy Soil and Its Application in Slope Instability Modelling

Microscopic sand production simulation and visual sanding pattern description in weakly consolidated sandstone reservoirs

Experimental Research on the Influence of Particle Size on Sand Production during Gas Hydrate Dissociation via Depressurization

Single- and Two-Phase Fluid Using a Device for Observation at the Pore Scale

Pressure Behavior Analysis of Permeability Changes Due to Sand Production in Offshore Loose Sandstone Reservoirs Using Boundary-Element Method

Experimental Study of Sand Migration under Distinct Sand Control Methods during Gas Hydrate Decomposition by Depressurization

Numerical investigation of sand production mechanisms in weak sandstone formations with various reservoir fluids

Development and experimental validation of a computational fluid dynamics-discrete element method sand production model

Pore-scale modelling of particle migration in loose sandstone

Sediment Instability Caused by Gas Production from Hydrate-bearing Sediment in Northern South China Sea by Horizontal Wellbore: Evolution and Mechanism

Solution for Sand Production Problem in Oil and Gas well

Sand control during gas production from marine hydrate reservoirs by using microbial-induced carbonate precipitation technology: A feasibility study