Abstract:This paper investigates the mechanical response of coral sand under particle breakage using a hierarchical multiscale model combining the discrete element method (DEM) and the finite element method (FEM). This DEM-FEM model links the microscopic interaction mechanisms to macroscopic phenomena such as strain localization and failure. A cohesive contact model was first utilized to simulate compaction bands in the DEM and construct a cohesive assembly with smaller particles distributed around a larger particle to better simulate the grinding and angular breakage of coral sand. A representative volume element (RVE) that includes particle breakage was then constructed and analyzed under periodic boundary conditions. DEM analysis was performed, and the results were compared with triaxial compression test data obtained from the literature, demonstrating that the constructed RVE effectively represents the mechanical properties of coral sand. The constructed RVE was used for hierarchical multiscale simulations, which showed good agreement with existing triaxial testing of coral sand. Finally, by setting a larger cohesive force, the constructed coral sand particles were prevented from breakage, and comparative analysis revealed that particle breakage weakens the mechanical properties of coral sand. Furthermore, different shapes of coral sand particles were constructed, and RVE and hierarchical multiscale simulations of triaxial tests were performed. The results indicated that the triaxial tests of long strip-shaped coral sand particles exhibit higher peak values compared to spherical coral sand particles. Additionally, a double porosity model of coral sand was constructed to analyze the impact of internal porosity on soil mechanical properties. The results showed that the presence of internal porosity significantly weakened the mechanical properties of coral sand. These findings highlight the significant impact of particle breakage and shape on the mechanical behavior of coral sand, offering important insights for engineering applications.

Modeling of Sand Particle Crushing in Split Hopkinson Pressure Bar Tests Using the Discrete Element Method

Discrete Element Modeling of Sand Behavior in a Biaxial Shear Test

Simulation of Split Hopkinson Pressure Bar Tests on Sands Using the Discrete-Element Method

DEM Study of the Stress Fields Around the Closed-Ended Displacement Pile Driven in Sand

Three-Dimensional DEM Simulation of Plugging Behaviour of Small-Diameter Open-Ended Model Piles Penetrating Into Sand

Undrained Responses of Anisotropic Granular Material under Rotational Shear by DEM

A Comparison of Two-Dimensional and Three-Dimensional Micromechanical Discrete Element Modeling of the Splitting Tests for Asphalt Mixtures

Simulation of Split Hopkinson Pressure Bar Tests on Sands with Low Water Content

DEM Modeling of Particle Breakage in Silica Sands under One-Dimensional Compression

Effect of Particle Size on High-Strain Rate Response of Sand

A New Approach to DEM Simulation of Sand Production

Study on the Mechanical Behavior of Sands Using 3D Discrete Element Method with Realistic Particle Models

Effect of particle size distribution on dynamic properties of cemented coral sand under SHPB impact loading

A discrete element study on sand response to cyclic loading: macro-micro perspectives

Simulation Study of Breakage in Coral Sand Particles under Dynamic Confined Compression

Size effect on contact behavior in DEM simple shear tests

Discrete Element Modeling of Strength and Failure Behavior of Transversely Isotropic Rock under Uniaxial Compression

Multiscale simulation study for mechanical characteristics of coral sand influenced by particle breakage

A coupled FEM-DEM study on mechanical behaviors of granular soils considering particle breakage

3D Finite Element Modelling of Fracture of Sand Particles Subjected to High Strain Loading Rate

DEM Simulation of Shearing Rockfills along Different Stress Paths