Abstract:Calcareous sand has been used as the main filling material in numerous reef constructions. Therefore, understanding its long-term dynamic engineering geological characteristics under cyclic applications of traffic or wave loading is crucial to the design and prediction of the serviceability of reef infrastructures. Considering this, seven monotonic triaxial tests and 33 high-cycle (25,000 cycles) drained triaxial tests were conducted on calcareous sand with various mean effective stresses (p') and cyclic stress ratios (ζ). The results show that the development of the accumulated axial strain (ε1acc) has a strong correlation with the positional relationship between the cyclic stress path and critical strength line (CSL) or static strength envelope (SSE) in the p'-q plane. The critical cyclic stress ratio ζc, that represents the cyclic stress path reaching the CSL, is proposed. When ζ>ζc, the growth rate of ε1acc with ζ increases drastically. Moreover, when the cyclic stress path approaches the SSE, ε1acc enters an incremental collapse state. The increase in p' diminishes the dilatancy of the volumetric strain εv. However, this response of εv reverses from decreasing to increasing with increasing ζ. The resilient modulus (Mr) increases with the number of cycles (N) due to the initial densification. If εv dilation occurs, Mr will decrease with N as particles lose contact. A single parameter for the cyclic stress path ratio (ψ) considering the effects of p', ζ, and SSE is proposed. Additionally, empirical formulas for calculating the ultimate ε1acc and Mr are established. Furthermore, particle degradation significantly worsens ε1acc and εv, but has a more profound effect on the compressibility of εv. This degradation is also detrimental to Mr. A certain deviation trend of the predicted values from the measured values is found to correspond with the relative particle breakage.

Cyclic-loading effects in sand: a micromechanical study considering particle breakage

Failure Mechanisms of Sand under Asymmetrical Cyclic Loading Conditions: Experimental Observation and Constitutive Modelling

Undrained Behavior of Sand under Cyclic Paths That Match Storm-Wave Loading Conditions

Effects of Initial Static Shear on Cyclic Resistance and Pore Pressure Generation of Saturated Sand

Advanced laboratory investigation of axial cyclic loading in silica sands

Sand Grain Crushing and Interface Shearing During Displacement Pile Installation in Sand

Discrete-Element Simulation of Dense Sand under Uni- and Bidirectional Cyclic Simple Shear Considering Initial Static Shear Effect

Three-dimensional Discrete Element Simulation of the Triaxial Cyclic Loading of Sandstone Based on a Nonlinear Parallel-Bonded Stress Corrosion Model

Theoretical Breakage Mechanics and Experimental Assessment of Stresses Surrounding Piles Penetrating into Dense Silica Sand

A discrete element study on sand response to cyclic loading: macro-micro perspectives

Particle breakage evolution during cyclic triaxial shearing of a carbonate sand

Cumulative deformations and particle breakage in calcareous sand subjected to drained high-cyclic loading: Experimental investigation

Experimental Study On Particle Breakage Of Carbonate Gravels Under Cyclic Loadings Through Large-Scale Triaxial Tests

Evolution of particle damage of sand during axial compression via arrested tests

Laws of volumetric deformation and particle breaking of calcareous sand under cyclic loading

Particle Shape Influence on the Deformation Resistance of Carbonate Sands under Drained Condition

Micro-and macro-mechanical behavior of crushable calcareous sand in South China Sea

Influence of Load Mode on Particle Crushing Characteristics of Silica Sand at High Stresses

Long-term behaviour and degradation of calcareous sand under cyclic loading

Effect of cyclic shearing on contact surfaces of geo-materials under constant normal force

Mechanical Properties and DEM-Based Simulation of Double-Fractured Sandstone under Cyclic Loading and Unloading