Abstract:We propose a hierarchical multiscale modeling approach to simulate the hydro-mechanical coupling behavior in saturated high-porosity sandstone, with a particular focus on the occurrence and transition of compaction bands. In this multiscale approach, we use the finite element method (FEM) to solve the global boundary value problem for a sandstone, and the discrete element method (DEM) to solve the local representative volume elements (RVEs) embedded at the Gauss integration points of the FE mesh to provide the effective material constitutive responses required for FEM. The global governing equations for a coupled hydro-mechanical problem are solved with the standard u–p formulation, where the total stress is decomposed into the pore pressure and the effective stress which is directly derivable from the DEM solution of the RVEs, according to the seminal Terzaghi's effective stress principle. By choosing proper RVEs to represent the typical microstructure of high-porosity sandstone, we perform both drained and undrained simulations on saturated sandstone specimens to examine localized compactive failures developed therein. We identify that both mean effective stress and porosity control critically the initiation and development of failure modes in sandstone. Under undrained shear, our simulations show that a sandstone specimen may first develop a compaction band followed by a gradual transition to a shear-enhanced compaction band and even shear band, with the build-up of excessive pore pressure and hence drop of mean effective stress. In the specimen, regions experiencing localized volumetric contraction show relatively higher pore pressure than other regions and act as the source of flux flow. The Darcy flux peaks during the formation of compaction band and decreases gradually in the following stages. To distinguish the different failure stages with distinct physical attributes, the ratio of deviatoric strain to volumetric strain is adopted as a useful indicator signifying the underlying microstructural mechanisms for different deformation bands. This study signifies the importance of considering pore pressure and mean effective stress in fluid-involved engineering operations, e.g. aquifer management, hydrocarbon extraction and CO2 geological sequestration.

Multishear Bounding Surface Modelling of Anisotropic Sands Accounting for Fabric and Its Evolution

Hypoplastic Model for Sand under Multidirectional Shearing Conditions Considering Fabric Change Effect

Non-coaxial hypoplastic model for sand with evolving fabric anisotropy including non-proportional loading

Hypoplastic Modeling of Anisotropic Sand Behavior Accounting for Rotation of Principal Stress Direction

J2-deformation-type Soil Model Coupled with State-Dependent Dilatancy and Fabric Evolution: Multiaxial Formulation and FEM Implementation

Multiscale Modelling and Analysis of Footing Resting on an Anisotropic Sand

Bounding Surface Plasticity Model for Clay under Cyclic Loading Conditions Considering Fabric Anisotropy

Failure Mechanisms of Sand under Asymmetrical Cyclic Loading Conditions: Experimental Observation and Constitutive Modelling

Quantifying and Modelling Fabric Anisotropy of Granular Soils

Effect of Fabric Anisotropy on Bearing Capacity and Failure Mode of Strip Footing on Sand: an Anisotropic Model Perspective

A Multiscale Investigation of Strain Localization in Cohesionless Sand

Micromechanics-based multimechanism bounding surface model for sands

Unified Modeling of the Influence of Consolidation Conditions on Monotonic Soil Response Considering Fabric Evolution

An Anisotropic Egg-Shaped Bounding Surface Model for Saturated Soft Clay

A novel constitutive model of the anisotropic sand accounting for the fabric evolution

Multiscale Modeling and Analysis of Compaction Bands in High-Porosity Sandstones

Unified modeling for clay and sand with a hybrid-driven fabric evolution law

Hypoplastic modeling of anisotropic sand behavior accounting for fabric evolution under monotonic and cyclic loading

Three-dimensional multi-mechanism bounding surface model for sands

An Anisotropic Plasticity Model Incorporating Fabric Evolution for Monotonic and Cyclic Behavior of Sand

A Simple Bounding Surface Elasto-Viscoplasticity Model for Marine Clays under Monotonic and Cyclic Loading