Abstract:We propose a hierarchical multiscale modeling approach to simulate the hydro-mechanical coupling behavior in saturated high-porosity sandstone, with a particular focus on the occurrence and transition of compaction bands. In this multiscale approach, we use the finite element method (FEM) to solve the global boundary value problem for a sandstone, and the discrete element method (DEM) to solve the local representative volume elements (RVEs) embedded at the Gauss integration points of the FE mesh to provide the effective material constitutive responses required for FEM. The global governing equations for a coupled hydro-mechanical problem are solved with the standard u–p formulation, where the total stress is decomposed into the pore pressure and the effective stress which is directly derivable from the DEM solution of the RVEs, according to the seminal Terzaghi's effective stress principle. By choosing proper RVEs to represent the typical microstructure of high-porosity sandstone, we perform both drained and undrained simulations on saturated sandstone specimens to examine localized compactive failures developed therein. We identify that both mean effective stress and porosity control critically the initiation and development of failure modes in sandstone. Under undrained shear, our simulations show that a sandstone specimen may first develop a compaction band followed by a gradual transition to a shear-enhanced compaction band and even shear band, with the build-up of excessive pore pressure and hence drop of mean effective stress. In the specimen, regions experiencing localized volumetric contraction show relatively higher pore pressure than other regions and act as the source of flux flow. The Darcy flux peaks during the formation of compaction band and decreases gradually in the following stages. To distinguish the different failure stages with distinct physical attributes, the ratio of deviatoric strain to volumetric strain is adopted as a useful indicator signifying the underlying microstructural mechanisms for different deformation bands. This study signifies the importance of considering pore pressure and mean effective stress in fluid-involved engineering operations, e.g. aquifer management, hydrocarbon extraction and CO2 geological sequestration.

SANISAND-H: A sand bounding surface model for high pressures

Multiscale Modeling and Analysis of Compaction Bands in High-Porosity Sandstones

Hypoplastic Model for Sand under Multidirectional Shearing Conditions Considering Fabric Change Effect

Failure Mechanisms of Sand under Asymmetrical Cyclic Loading Conditions: Experimental Observation and Constitutive Modelling

Hypoplastic Modeling of Anisotropic Sand Behavior Accounting for Rotation of Principal Stress Direction

Non-coaxial hypoplastic model for sand with evolving fabric anisotropy including non-proportional loading

Multishear Bounding Surface Modelling of Anisotropic Sands Accounting for Fabric and Its Evolution

SANISAND‐FN: An evolving fabric‐based sand model accounting for stress principal axes rotation

SANISAND‐C*: Simple ANIsotropic constitutive model for SAND with Cementation

Micromechanics-based multimechanism bounding surface model for sands

Drained Analyses of Cylindrical Cavity Expansion in Sand Incorporating a Bounding-Surface Model with State-Dependent Dilatancy

SANISAND-MS-T: Simple ANIsotropic SAND model with Memory Surface for Temperature effects

Modified SANISAND‐F model for simple shear path

An improved pressure dependent multi-yield surface model: calibration and validation

Bounding surface plasticity for sand using fractional flow rule and modified critical state line

A unified monotonic model for sand based on modified hyperbolic equation and state-dependent dilatancy

Three-dimensional multi-mechanism bounding surface model for sands

STUDY ON A TWO-YIELD SURFACE MODEL WITH CONSIDERATION OF STATE-DEPENDENT DILATANCY FOR CALCAREOUS SAND

A State-Dependent Constitutive Model for Coarse-Grained Gassy Soil and Its Application in Slope Instability Modelling

A thermodynamic critical state model for sands

A Basic Constitutive Model for Sands