Abstract:The shear characteristics of calcareous sand, a typical deposit in the South China Sea, could significantly influence the safety and stability of marine structures. Previous studies showed that many factors, such as temperature and surface roughness, could affect the mobilized shear strength between the calcareous sand and steel surface. Therefore, studies on the shear behaviors of the steel-sand interface under various thermal conditions are necessary. In this study, a new multifunctional sediment shear system has been developed and employed to investigate the shear performance. For this purpose, steel plates with different surface roughness were tested under various normal stress values, shear displacement rates and temperatures. Shear strength and deformation were analyzed using test data to reveal the relationships between several factors and the shear strength of the steel-sand interface. Results from test demonstrate that the interfacial shear strength on rough steel interfaces will be 1.45–3.15 times higher than that on the smooth steel interface. Besides, the shear strength of the interface rises significantly with the roughness of the steel plate. The peak friction angle increases rapidly at the start and then tends to stabilize with the increase of normalized roughness. The interfacial shear strength could be enhanced in low-temperature environments but would reduce in high-temperature environments, e.g. the energy pile, particularly under low normal stress. The shear displacement rate also has a positive effect on the interface shear strength for most cases in this study. Finally, a new nonlinear function is proposed to describe the peak friction angle ratio of foundation interface to consider the effect of temperature and shear displacement rate reasonably.

Experimental Study of Cyclic Shear Stiffness and Damping Ratio of Carbonate Sand-Steel Interface

Monotonic Behavior of Interface Shear Between Carbonate Sands and Steel

Shear Band Between Steel and Carbonate Sand Under Monotonic and Cyclic Loading

Cyclic behavior of interface shear between carbonate sand and steel

Effects of Initial Static Shear on Cyclic Resistance and Pore Pressure Generation of Saturated Sand

Sand-Steel Interface Behaviour Under Large-Displacement And Cyclic Shear

Experimental study of interface performance between calcareous sand and steel pile with different surface roughness and temperatures

A study on the cyclic shear and particle breakage characteristics of the interface between steel and calcareous sand

Research on Shear Behavior of Sand–Structure Interface Based on Monotonic and Cyclic Tests

Experimental research on reinforcement-soil interface stiffness and damping ratio under cyclic shearing

Study on Cyclic Shear Properties of Siliceous Sand–Steel Interface under Different Normal Loading Conditions

Particle Shape Influence on the Deformation Resistance of Carbonate Sands under Drained Condition

Experimental Study of Interface Shearing between Calcareous Sand and Steel Plate Considering Surface Roughness and Particle Size

Dynamic Strength of Carbonate Sand in Complex Stress State

Degradation effect of seawater on the long-term dynamic behavior of artificially cemented sand

Interface Shear Behavior Between MICP-Treated Calcareous Sand and Steel

Effect of Cyclic Jacking on Sand-Pile Interface Shear Behaviour

Experimental study of triaxial shear characteristics of carbonate mixed sand

Static Simple Shear Tests on Mechanical Behavior of Interface Between Coral Sand and Concrete

Experimental and DEM Study on Shear Properties of Steel Pipe–Soil Interface

Shear response of calcareous sand-steel snake skin-inspired interfaces