Abstract:Surface groove morphology of structure and particle distribution of soil had a significant effect on the surface friction of structure. In order to investigate the interface shear stress-shear displacement curves, interface model and interface shear strength index when normal stress, groove width, and groove angle change, the interface shear tests of standard sand with steel plates are performed using an improved direct shear apparatus. Test results indicate that the peak shear stress increases with normal stress and the intersection angle between groove direction and shear direction. When the angle increases by 45°, the peak shear stress increases range from 4% to 13%. The peak shear stress increases with groove width, for every 1 mm increase in groove width, and the increasing extent of peak shear stress ranges from 4% to 22%, 3% to 13%, and 1% to 6%, respectively. When the groove angle is 45° and 90°, the increasing extent of peak shear stress decreases with groove width, but when the groove angle is 0°, the decrease regularity of peak shear stress increasing extent is not obvious. The hyperbolic model and Gompertz-C model are used to study the shear stress-shear displacement curves of sand-steel interface. The ratio of the interface peak shear stress of the hyperbolic model and Gompertz-C model to that of the shear test ranges from 0.90 to 1.03 and 0.88 to 0.98, respectively. The interface friction angle at the sand-steel interface ranges from 22° to 29°, and the friction angle of the rough interface is larger than that of the smooth interface. The interface friction angle increases with the intersection angle between the groove direction and the shear direction, the largest at 90°, the second at 45°, and the smallest at 0°. Under the same groove angle, the interface friction angle increases with the groove width, for every 1 mm increase in groove width, and the increasing extent of interface friction angle ranges from 4% to 15%, 4% to 7%, and 2% to 3%, respectively. The increasing extent of interface friction angle decreases with groove width, and this change rule is more obvious at the groove angle of 45° and 90° than at 0°.

Monotonic Behavior of Interface Shear Between Carbonate Sands and Steel

Cyclic behavior of interface shear between carbonate sand and steel

Experimental Study of Cyclic Shear Stiffness and Damping Ratio of Carbonate Sand-Steel Interface

Shear Band Between Steel and Carbonate Sand Under Monotonic and Cyclic Loading

Sand-Steel Interface Behaviour Under Large-Displacement And Cyclic Shear

Experimental Study of Interface Shearing between Calcareous Sand and Steel Plate Considering Surface Roughness and Particle Size

Experimental study of interface performance between calcareous sand and steel pile with different surface roughness and temperatures

A study on the cyclic shear and particle breakage characteristics of the interface between steel and calcareous sand

Shear response of calcareous sand-steel snake skin-inspired interfaces

Research on Shear Behavior of Sand–Structure Interface Based on Monotonic and Cyclic Tests

Shear tests of interfaces between calcareous sand and steel

Study on Cyclic Shear Properties of Siliceous Sand–Steel Interface under Different Normal Loading Conditions

Particle Shape Influence on the Deformation Resistance of Carbonate Sands under Drained Condition

Micro-and macro-mechanical behavior of crushable calcareous sand in South China Sea

Effects of Groove Feature on Shear Behavior of Steel-Sand Interface

Mechanical Behaviors of Interaction Between Coral Sand and Structure Surface

Effects of Relative Roughness and Particle Size on the Interface Behavior of Concrete Suction Caisson Foundation for Offshore Wind Turbines

Experimental study on 3D monotonic behavior of a gravel-structure interface considering initial shear stress

Experimental and DEM Study on Shear Properties of Steel Pipe–Soil Interface

Experimental study on effects of the roughness on mechanical behaviors#br#of concrete-sand interface

Three-dimensional Monotonic and Cyclic Behavior of a Gravel–steel Interface from Large-Scale Simple-Shear Tests