Abstract:To provide overall protection to large turbo-generators, a new approach about leading-out mode of neutral points and disposition of protection schemes is presented. There are three terminals at the neutral point in most large generators. Complete longitudinal differential protection is the most commonly used method for stator winding protection, although it can not detect turn-to-turn faults in a same phase since there is no difference in the current entering and leaving the phase winding. To improve protection performance, it is necessary to lead out four or six terminals at the neutral point of large turbogenerators. However this can cause great changes of electrical machine design and manufacture. To solve this problem, the paper suggests that the second branch of phase A and that of phase B are led out and equipped with current transformer in the new leading-out mode. In addition, the first branches of three-phase and the second branch of phase C are connected to form the third leading-out terminal. By doing so, the incomplete longitudinal differential protection of phase C is different from that of phase A and phase B. To examine the sensitivity of the new protection scheme, two turbo-generators of 300 MW are simulated using the proposed multi-loop method. Simulation results indicate that the performance of the new protection scheme is much better than that of the traditional protection.

Design and Research of Main Protection and Neutral Lead Mode for 1 000 MW Turbine Generator

Coordination and Control Principle Between Grid-related Protection of Large-scale Nuclear Units and Security Automatic Devices of Power Grids

Coordinated protection and control between largecapacity nuclear power plants and power grids

Optimum Design of Main Protection Configuration Scheme for Large Generators

Research on the Main Protection Configuration Scheme for Internal Faults of Longtan Generator

Normalizing the Design Method of Main Protection for Large and Medium Sized Generators

Reconsideration on the Necessity of Quantitative Design of Main Protectionfor Large and Medium Hydro-Generator

Study On New Leading-Out Mode Of Neutral Points Of Large-Sized Turbo-Generator

Study on New Leading-out Mode of Neutral Points of Large Turbo-generator

Review and Prospect of Main Protection Design for Hydro - Generators of Three Gorges Power Station

Quantitative Design of Main Protection Scheme for Hydro-Generators Considering Occurrence Probability of Internal Faults

Internal Fault Analysis and Optimization Design of Main Protection Scheme for Shanghai Electric Phase Modifier

THE MAIN PROTECTION SCHEME OF INTERNAL SHORT CIRCUIT FOR GENERATOR OF LARGE-SIZED (ABOVE 600 MW) HYDROELECTRIC POWER STATION--Based on Simulation for Generators of Three Gorges Hydroelectric Power Station

Design Characteristic of Main Protection Configuration Scheme for Large-sized Hydro-Generators With Odd Branches

INVESTIGATION OF TURN-TO-TURN FAULT RATIO AND QUANTITATIVE DESIGN OF MAIN PROTECTION CONFIGURATION SCHEME FOR LARGE-SIZED TURBO-GENERATOR

Reconsideration of the Main Protection Scheme of Internal Faults for No.1 Generator in the Three Gorges Power Station

Optimized Design Of Main Protection Configuration Scheme For Internal Faults Of Shawan Generator

The Research and Development on Injection Scheme for Stator Ground Protection of 1000 MW Generator

Combined Primary with Secondary to Create New Method for Generator Optimization Design

Importance of Quantitative and Optimum Design of Main Protection Configuration Scheme for Large and Medium Generator

Reconsideration of the Design Method of Microcomputer-Based Main Protection for Large Hydro-Generator