Abstract:A quasi-continuous-wave (QCW) laser diode (LD) driver is commonly used to drive diode bars and stacks designed specifically for QCW operations in solid-state lasers. Such drivers are optimized to deliver peak current and voltage pulses to LDs while maintaining low average power levels. As a result, they are widely used in laser processing devices and laser instruments. Traditional high-energy QCW LD drivers primarily use capacitors as energy storage components and pulsed constant-current sources with op-amps and power metal-oxide-semiconductor field-effect transistors (MOSFETs) as their core circuits for generating repeated constant-current pulses. The drawback of this type of driver is that the driver's output voltage needs to be manually adjusted according to the operating voltage of the load before use to maximize driver efficiency while providing a sufficient current. Another drawback is its inability to automatically adjust the output voltage to maintain high efficiency when the load changes during the driver operation. Drastic changes in the load can cause the driver to fail to function properly in extreme cases. Based on the above traditional circuit structure, this study designed a stability compensation circuit and realized a QCW LD driver for driving a GS20 diode stack with a maximum repetition rate of 100 Hz, a constant current of approximately 300 A, a load voltage of approximately 10 V, and a pulse width of approximately 300 μs. In particular, a high-efficiency, load-adaptive driving method was used with the MOSFETs in the critical saturation region (i.e., between the linear and saturated regions), controlling its power loss effectively while achieving maximum output current of the driver. The experiments demonstrated that the driver efficiency could be maintained at more than 80% when the load current varied from 50 to 300 A.

A monolithic high modulation efficiency CMOS laser diode / modulator driver

High-Performance Electro-Optic Modulator on Silicon Nitride Platform with Heterogeneous Integration of Lithium Niobate

200 Gb/s Optical-Amplifier-Free IM/DD Transmissions Using a Directly Modulated O-Band DFB+R Laser Targeting LR Applications

A Kind of High Bit Rate Laser Diodes Driver

25Gbit/s Fully Cmos-Compatible Silicon Modulator Based on Interleaved Pn Junctions

DC～3 Gb/s LD/EA Drivers Using Discrete Double Polysilicon Bipolar Transistors

High-speed, low-loss silicon Mach-Zehnder modulators with doping optimization.

Compact 100gbaud Driverless Thin-Film Lithium Niobate Modulator on a Silicon Substrate

High speed silicon Mach-Zehnder modulator based on interleaved PN junctions.

Single-drive High-Speed Lumped Depletion-Type Modulators Toward 10 Fj/bit Energy Consumption

2.5Gb/s 1.55 μm InGaAsP/InP DFB laser/electroabsorption modulator integrated device

2.5 Gb/s Electroabsorption Modulator Integrated with Partially Gain-Coupled Distributed Feedback Laser Fabricated Using a Very Simple Device Structure

Highly Efficient Silicon Michelson Interferometer Modulators

High-speed Silicon Modulators for the 2 Μm Wavelength Band

Proposal for $Q$ -Modulated Semiconductor Laser

60 Gbit/s Silicon Modulators with Enhanced Electro-Optical Efficiency

Q-modulated Semiconductor Laser

Q-modulated Semiconductor Laser Using Deep Etched Subwavelength Trenches

Cost-Effective Partially Corrugated Waveguide Laser Diodes for Use in Optical Access Networks

A Load-Adaptive Driving Method for a Quasi-Continuous-Wave Laser Diode