Abstract:In the bioliq process, biomass is converted to gasoline over four steps including pyrolysis, synthesis gas (syngas) generation via gasification, gas cleaning, and gasoline synthesis via dimethyl ether (DME). This work aims to investigate the gasoline synthesis plant of the bioliq process and also alternative process routes for the conversion of biomass-derived syngas to gasoline via methanol (MeOH) and DME pathways by process simulation in Aspen Plus, using a syngas composition adapted from the bioliq plant and enhanced with makeup H2. The simulations were established using kinetic models for MeOH, DME, and water–gas shift (WGS) synthesis based on selected models from the literature and component yield models for MeOH/DME to gasoline (MTG/DTG) reactions based on product characteristics from known gasoline synthesis plants. The selected process routes were compared regarding product mass and energetic efficiencies and H2 and CO2 balances. The results showed that an optimized bioliq process, i.e., biofuel synthesis via direct DME synthesis with a WGS unit for makeup H2 supply, is efficient in terms of syngas conversion and gasoline productivity, although it has a drawback concerning CO2 generation. For this process, the mass and chemical energy efficiencies of gasoline based on syngas were calculated to be approximately 15 and 65%, respectively. Comparatively, for the similar process via the MeOH pathway, these efficiencies were found to be 11 and 50%, respectively. The CO and H2 conversion rates for gasoline synthesis via DME were found to be about 77 and 64%, respectively, whereas via MeOH, they were obtained as ca. 48 and 28%, respectively. Additionally, the optimized process was scaled up for production of 100,000 tons/year gasoline and evaluated based on mass and chemical energy and CO2 and element (hydrogen, carbon, and oxygen) balances. Here, the mass and chemical energy efficiencies of gasoline based on biomass feed were calculated to be 13 and 35%, respectively.

An Integrated Biomass-Derived Syngas/dimethyl Ether Process

Experimental study for dimethyl ether production from biomass gasification and simulation on dimethyl ether production

One-step synthesis of dimethyl ether from biomass-derived syngas on CuO-ZnO-Al2O3/HZSM-5 hybrid catalyst: Combination method, synergistic effect, water-gas shift reaction and catalytic performance

Synthetic fuels and chemicals production from biomass synthesis gas

Direct synthesis of ethanol from dimethyl ether and syngas over combined H-Mordenite and Cu/ZnO catalysts.

Thermodynamic Simulation of Direct DME Synthesis via Biomass Gasification

Dimethyl Ether Synthesis from CO2 Hydrogenation on a CuO−ZnO−Al2O3−ZrO2/HZSM-5 Bifunctional Catalyst

Process design and downstream optimization of the direct synthesis route for cleaner production of dimethyl ether from biogas

Study on synthesis of dimethyl ether from syngas obtained by biomass gasification

Gasoline Synthesis from Biomass-Derived Syngas Comparing Different Methanol and Dimethyl Ether Pathways by Process Simulation, Based on the Bioliq Process

Biomass-derived activated carbon catalysts for the direct dimethyl ether synthesis from syngas

Direct Synthesis of Dimethyl Ether on Supported Cu-Mn Catalysts

Synthesis of Dimethyl Ether on Supported Cu-Mn Catalysts

Catalysis for One-step Synthesis of Dimethyl Ether from Hydrogenation of CO

C2–C4 Hydrocarbons Synthesis from Syngas over CuO–ZnO–Al2O3/SAPO‐34 Bifunctional Catalyst

Direct Conversion of Syngas into Methyl Acetate, Ethanol and Ethylene by Relay Catalysis via Dimethyl Ether Intermediate.

Dimethyl Ether Synthesis from Methanol and Syngas over Different Sized HY Zeolite and Cu-Mn-Zn/HY Bifunctional Catalyst

Synthesis of dimethyl ether from greenhouse gas CO_2

Efficient Conversion of Syngas into Ethanol by Tandem Catalysis

Hybrid-functional Material for Sorption-Enhanced Hydrogen-Rich Syngas Production from Biomass: Effect of Material Preparation Process

Synergistic Effect of Zinc and Manganese in Cu-Mn-Zn/Y Catalyst for Syngas-to-dimethyl Ether