Abstract:Fe2O3 film anodes are promising for application in lithium-ion micro-batteries in terms of their high theoretical capacity, earth-abundancy, and being environmentally friendly. Nevertheless, the low intrinsic electronic conductivity, sluggish Li+ diffusion, and unstable electrode-electrolyte interface stemming from cycling within Fe2O3 film limit its cyclic stability and rate capability. Herein, extraordinary cyclability and rate performance boosting of nanoporous Fe2O3 film anode are achieved using facile phosphorous heteroatom doping. The unique P-Fe2O3 nanoporous film can reversibly exhibit a capacity of 725 mAh/g at 248 mA g(-1) for 300 cycles with a capacity retention of 94.5 %, which is approximately 15 times higher than that without P doping. Moreover, the P-Fe2O3 nanoporous film can retain a capacity of 401 mAh/g at a high rate of 2.48 A/g and the initial coulombic efficiency can reach 90.4 %. Experimental results and density functional theory analysis verify that the enhanced performance derives from the synergistic effect of surface phosphorylation layer and bulk P doping defect, which can promote electron and Li+ transportation meanwhile enhancing surface faradaic redox sites. The insight from this work can provide a new avenue for the rational design of other advanced film electrodes through defect and surface engineering simultaneously.

Physical and Electrochemical Characterization of Thin Films of Iron Phosphate and Nitrided Iron Phosphate for All-Solid-State Batteries

Kinetics of Li[sup +] Ion Diffusion into FePO[sub 4] and FePON Thin Films Characterized by AC Impedance Spectroscopy

The fabrication and characterization of thin films for all solid state rechargeable batteries

Studies on lithium phosphorous oxynitride electrolyte thin films and a new all-solid-state thin film lithium battery

Superior lithium storage in Fe<sub>2</sub>O<sub>3</sub> nanoporous arrays endowed by surface phosphorylation and bulk phosphorous doping

Synthesis and Characterization of LiFePO4 Nanoparticle/Mesoporous Carbon Composites As High-Power Cathode Materials for Lithium-Ion Batteries

All-solid-state Thin-Film Batteries Based on Lithium Phosphorus Oxynitrides

Fabrication of Solid-State Thin-Film Batteries Using LiMnPO4 Thin Films Deposited by Pulsed Laser Deposition

Formation of mono/bi-layer iron phosphate and nucleation of LiFePO4 nano-crystals from amorphous 2D sheets in charge/discharge process for cathode in high-performance Li-ion batteries

The Transformation from Amorphous Iron Phosphate to Sodium Iron Phosphate in Sodium-Ion Batteries

All-Solid-State Thin Film Lithium Batteries With Licoo2 Cathodes

Lithium Phosphorous Oxynitride (lipon) Coated NiFe2O4 Anode Material with Enhanced Electrochemical Performance for Lithium Ion Batteries

All-Solid-State Rechargeable Lithium Metal Battery with a Prussian Blue Cathode Prepared by a Nonvacuum Coating Technology

Electrochemical Characterization of Amorphous LiFe(WO4)2 Thin Films As Positive Electrodes for Rechargeable Lithium Batteries

Iron-Based Mixed Phosphate Na4Fe3(PO4)2P2O7 Thin Films for Sodium-Ion Microbatteries

Rational Design of Atomic‐Layer‐Deposited LiFePO4 As a High‐Performance Cathode for Lithium‐Ion Batteries

A versatile method for preparing FePO4 and study on its electrode performance in lithium ion batteries

An amorphous LiCo1/3Mn1/3Ni1/3O2 thin film deposited on NASICON-type electrolyte for all-solid-state Li-ion batteries

High‐rate Lithium Iron(II) Phosphate as Cathode Material for Rechargeable Lithium Batteries

Amorphous LiCoO2 Thin Films on Li1+x+yAlxTi2−xSiyP3−yO12 Prepared by Radio Frequency Magnetron Sputtering for All-Solid-state Li-ion Batteries

Electrostatic spray deposition of porous Fe2O3 thin films as anode material with improved electrochemical performance for lithium–ion batteries