Abstract:The olivine LiFePO4 with various morphologies and different growth lattice planes was prepared by a controllable hydrothermal method with changing precursor concentration and using phytic acid as phosphorus source. The microstructure, crystal orientation and electrochemical performance of the prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HR-TEM) and charge–discharge tests. The results show that the morphologies of all samples change from spindle-like to hierarchical plate-like and then to long plate-like shape, and the main exposed facets transform from (100) to (001). This indicates that the precursor concentration and phytic acid play important roles in exposing facets and controlling the morphology of LiFePO4. In order to illustrate these phenomena, a reasonable assembly process is provided and the formation is explained. Li ion diffusion coefficient along [100] and [001] directions was calculated by using electrochemical impedance spectroscopy (EIS). The results show that the diffusion coefficient of (100) facet is higher than that of (001) facet, indicating a good electrochemical performance for (100) facet. In addition, the capacity test is carried out, which also confirms the above results. With the precursor concentration of 0.5[Formula: see text]M, the obtained LiFePO4 with self-assembled hierarchical structure, smaller size and (100) facet shows the best electrochemical performance: 162.1[Formula: see text]mAh/g at 0.1[Formula: see text]C and 112.4[Formula: see text]mAh/g at 10[Formula: see text]C. Using phytic acid as phosphorus source and controlling precursor concentration to prepare high performance LiFePO4 open up a new prospect for the production of cathode materials for lithium ion batteries.

Formation of mono/bi-layer iron phosphate and nucleation of LiFePO4 nano-crystals from amorphous 2D sheets in charge/discharge process for cathode in high-performance Li-ion batteries

Understanding the Conversion Mechanism and Performance of Monodisperse FeF2 Nanocrystal Cathodes

Ascorbic Acid-Assisted Solvothermal Synthesis of LiMn 0.9 Fe 0.1 PO 4 /C Nanoplatelets with Enhanced Electrochemical Performance for Lithium Ion Batteries

Controllable Synthesis and Morphology Evolution of Hierarchical LiFePO4 Cathode Materials for Li-ion Batteries

Olivine LiFePO4 Nanocrystallites Embedded in Carbon-Coating Matrix for High Power Li-ion Batteries

2D amorphous iron phosphate nanosheets with high rate capability and ultra-long cycle life for sodium ion batteries

Hydrothermal Synthesis of Flower-Like LiMnPO4nanostructures Self-Assembled with (010) Nanosheets and Their Application in Li-ion Batteries

Mono-dispersed LiFePO4@C Core-Shell [001] Nanorods for a High Power Li-ion Battery Cathode

Synthesis and Characterization of LiFePO4 Nanoparticle/Mesoporous Carbon Composites As High-Power Cathode Materials for Lithium-Ion Batteries

on phosphate nanosheets with high rate capability and ultra-long cycle life for sodium ion batteries †

Ultrathin LiFePO4 Nanosheets Self-Assembled with Reduced Graphene Oxide Applied in High Rate Lithium Ion Batteries for Energy Storage

The Royal Society of on phosphate nanosheets with high rate capability and ultra-long cycle life for sodium ion batteries †

Effect of Amorphous FePO4 Coating on Structure and Electrochemical Performance of Li1.2Ni0.13Co0.13Mn0.54O2 As Cathode Material for Li-ion Batteries

Concentration-Controlled and Phytic Acid-Assisted Synthesis of Self-Assembled LiFePO4 As Cathode Materials for Lithium-Ion Battery

Three-dimensional spherical graphene coated nano-lithium iron phosphate cathode material for high power lithium ion batteries

Morphological Solution for Enhancement of Electrochemical Kinetic Performance of LiFePO4

Preparation and characterization of nanoscale LiFePO 4 cathode materials by a two-step solid-state reaction method

Rational Design of Atomic‐Layer‐Deposited LiFePO4 As a High‐Performance Cathode for Lithium‐Ion Batteries

Design of surface protective layer of LiF/FeF3 nanoparticles in Li-rich cathode for high-capacity Li-ion batteries

Self-Templated Formation of Hollow Yolk-Like Spheres Iron Fluoride As Cathode Material for High-Performance Li-Ion Batteries

Nanoporous spherical LiFePO4 for high performance cathodes