Abstract:All-solid-state batteries have become the most potential next-generation energy-storage devices. However, it is quite difficult to simultaneously achieve a single solid-state electrolytes (SSEs) layer with both dendrite-free Li metal plating and low interfacial resistance between the cathode and SSEs. Herein, an integrated structure of cathode and double-layer solid electrolyte membrane (IS-CDL) is designed, which greatly improves the interfacial contact and suppresses the Li dendrite growth. The first "polymer in ceramic" solid electrolyte layer (SL1) consists of 80 wt % Li1.4Al0.4Ti1.6(PO4)3 (LATP) nanoparticles and 20 wt % polyethylene oxide (PEO), and the second polymer electrolyte layer is PEO-based solid electrolyte layer (SL2). The SL1 with high mechanical properties can hinder the growth of Li dendrites and reduce the interfacial resistance with the cathode. The SL2 can inhibit the side reaction between the Li metal and LATP. The Li symmetric cells with sandwich-type hierarchical electrolyte (SL2/SL1/SL2) can stably cycle over 3200 h at 0.1 mA cm–2 at 45 °C. The obtained all-solid-state LiFePO4–IS-CDL/Li batteries present a capacity of 142.6 mA h g–1 at 45 °C with the capacity retention of 91.7% after 100 cycles, and all-solid-state NCM811–IS-CDL/Li batteries deliver a specific capacity of 175.5 mA h g–1 at 60 °C. This work proposes an effective strategy to fabricate all-solid-state lithium batteries with high electrochemical performance.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c16390?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c16390</a>.Preparation of high mass loading cathode; SEM image of pristine LATP nanoparticles; optical images of the solid electrolyte membrane; EIS spectra of Li/LFP–IS–CSL1 cells and Li/LFP–IS–CDL cells; impedance spectra of solid electrolyte membranes; digital photographs of the lithium metal surface; charge and discharge curves; voltage profile of a symmetric cell; and cycling performances, EIS spectra, and charge–discharge voltage profiles of NCM811 (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c16390/suppl_file/am0c16390_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

All-Solid-State Rechargeable Lithium Metal Battery with a Prussian Blue Cathode Prepared by a Nonvacuum Coating Technology

LiNi0.5Mn1.5O4 cathode microstructure for all-solid-state batteries

LiNi 0.5 Mn 1.5 O 4 Cathode Microstructure for All-Solid-State Batteries.

A Plastic-Crystal Electrolyte Layer Promotes Interfacial Stability of Ni-Rich Oxide Cathode in Li6PS5Cl-Based All-Solid-State Rechargeable Li Batteries

Studies on lithium phosphorous oxynitride electrolyte thin films and a new all-solid-state thin film lithium battery

Stable all-solid-state lithium metal batteries enabled by ultrathin LiF/Li3Sb hybrid interface layer

An All-Solid-State Lithium Metal Battery Based on Electrodes-Compatible Plastic Crystal Electrolyte

Long cycle life all-solid-state batteries enabled by solvent-free approach for sulfide solid electrolyte and cathode films

Integrated Design of a Functional Composite Electrolyte and Cathode for All-Solid-State Li Metal Batteries

All-Solid-State Thin Film Lithium Batteries With Licoo2 Cathodes

A Solid Electrolyte Based on Electrochemical Active Li4Ti5O12 with PVDF for Solid State Lithium Metal Battery

A "Lithium-Free" Thin-Film Battery with an Unexpected Cathode Layer

Low Resistance-Integrated All-Solid-State Battery Achieved By Li7la3zr2o12 Nanowire Upgrading Polyethylene Oxide (Peo) Composite Electrolyte And Peo Cathode Binder

Composite Polymer Electrolytes Based on PVA/PAN for All-Solid-State Lithium Metal Batteries Operated at Room Temperature

Integrated Structure of Cathode and Double-Layer Electrolyte for Highly Stable and Dendrite-Free All-Solid-State Li-Metal Batteries

Asymmetric double-layer composite electrolyte with enhanced ionic conductivity and interface stability for all-solid-state lithium metal batteries

An All-Solid-State Lithium Polyaniline Rechargeable Cell

Physical and Electrochemical Characterization of Thin Films of Iron Phosphate and Nitrided Iron Phosphate for All-Solid-State Batteries

All-Solid-State Thin-Film Lithium-Sulfur Batteries

A Solid Electrolyte Based on Electrochemical Active Li<sub>4</sub>Ti<sub>5</sub>O<sub>12</sub> with PVDF for Solid State Lithium Metal Battery

A high energy and power all-solid-state lithium battery enabled by modified sulfide electrolyte film