Abstract:All-solid-state batteries have become the most potential next-generation energy-storage devices. However, it is quite difficult to simultaneously achieve a single solid-state electrolytes (SSEs) layer with both dendrite-free Li metal plating and low interfacial resistance between the cathode and SSEs. Herein, an integrated structure of cathode and double-layer solid electrolyte membrane (IS-CDL) is designed, which greatly improves the interfacial contact and suppresses the Li dendrite growth. The first "polymer in ceramic" solid electrolyte layer (SL1) consists of 80 wt % Li1.4Al0.4Ti1.6(PO4)3 (LATP) nanoparticles and 20 wt % polyethylene oxide (PEO), and the second polymer electrolyte layer is PEO-based solid electrolyte layer (SL2). The SL1 with high mechanical properties can hinder the growth of Li dendrites and reduce the interfacial resistance with the cathode. The SL2 can inhibit the side reaction between the Li metal and LATP. The Li symmetric cells with sandwich-type hierarchical electrolyte (SL2/SL1/SL2) can stably cycle over 3200 h at 0.1 mA cm–2 at 45 °C. The obtained all-solid-state LiFePO4–IS-CDL/Li batteries present a capacity of 142.6 mA h g–1 at 45 °C with the capacity retention of 91.7% after 100 cycles, and all-solid-state NCM811–IS-CDL/Li batteries deliver a specific capacity of 175.5 mA h g–1 at 60 °C. This work proposes an effective strategy to fabricate all-solid-state lithium batteries with high electrochemical performance.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c16390?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c16390</a>.Preparation of high mass loading cathode; SEM image of pristine LATP nanoparticles; optical images of the solid electrolyte membrane; EIS spectra of Li/LFP–IS–CSL1 cells and Li/LFP–IS–CDL cells; impedance spectra of solid electrolyte membranes; digital photographs of the lithium metal surface; charge and discharge curves; voltage profile of a symmetric cell; and cycling performances, EIS spectra, and charge–discharge voltage profiles of NCM811 (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c16390/suppl_file/am0c16390_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

LiNi 0.5 Mn 1.5 O 4 Cathode Microstructure for All-Solid-State Batteries.

LiNi0.5Mn1.5O4 cathode microstructure for all-solid-state batteries

Well-dispersed single-crystalline nickel-rich cathode for long-life high-voltage all-solid-state batteries

A Dynamically Stable Sulfide Electrolyte Architecture for High-Performance All-Solid-State Lithium Metal Batteries

Nanostructured Β-Li3ps4 for All-Solid Lithium-Sulfur Batteries

Achieving stable all-solid-state lithium-metal batteries by tuning the cathode-electrolyte interface and ionic/electronic transport within the cathode

Interphase Stabilization of LiNi0.5 Mn1.5 O4 Cathode for 5 V-Class All-Solid-State Batteries

Liquid-phase sintering enabling mixed ionic-electronic interphases and free-standing composite cathode architecture toward high energy solid-state battery

Integrated Structure of Cathode and Double-Layer Electrolyte for Highly Stable and Dendrite-Free All-Solid-State Li-Metal Batteries

Achieving the High Capacity and High Stability of Li-Rich Oxide Cathode in Garnet-Based Solid-State Battery

High-Performance Sulfide All-Solid-State Batteries Enabled by High-Voltage Ni-Rich Cathode with a Conformal and Conductive Protective Layer

High‐Capacity, Long‐Life Sulfide All‐Solid‐State Batteries with Single‐Crystal Ni‐Rich Layered Oxide Cathodes

A gradient oxy-thiophosphate-coated Ni-rich layered oxide cathode for stable all-solid-state Li-ion batteries

A Solid‐State Battery Cathode with a Polymer Composite Electrolyte and Low Tortuosity Microstructure by Directional Freezing and Polymerization

A Plastic-Crystal Electrolyte Layer Promotes Interfacial Stability of Ni-Rich Oxide Cathode in Li6PS5Cl-Based All-Solid-State Rechargeable Li Batteries

Mechano‐Electrochemical Behavior of Nanostructured Li‐ and Mn‐Rich Layered Oxides with Superior Capacity Retention and Voltage Decay for Sulfide‐Based All‐Solid‐State Batteries

Exploring the Cathode Active Materials for Sulfide-Based All-Solid-State Lithium Batteries with High Energy Density

Antimony Doping Enabled Radially Aligned Microstructure in LiNi0.91Co0.06Al0.03O2 Cathode for High‐Voltage and Low‐Temperature Lithium Battery

Slurry-Coated LiNi0.8Co0.1Mn0.1O2-Li3InCl6 Composite Cathode with Enhanced Interfacial Stability for Sulfide-Based All-Solid-State Batteries.

5V-class sulfurized spinel cathode stable in sulfide all-solid-state batteries

A Catalyst SnO2 Improves the Performance of All-Solid-State Batteries with LiNi0.5Mn1.5o4@SnO2 Cathodes, Pmma-Pvdf@ Li1.3ai0.3ti1.7(Po4)3 Composite Solid Electrolyte and Lithium Metal Anodes