Abstract:Nanophase SiC/Si3N4 composite powders were synthesized by the carbothermal nitridation of SiO2. These powders have desirable characteristics of high quality with oxygen contents on the order of 1.5 to 2 wt. %, surface area of ∼ 10 m2/g, submicron α‐Si3N4, low metallic impurity levels, and a homogeneous distribution of the nanophase SiC phase. High‐resolution TEM analysis has shown that the content and size of the nanophase SiC can be varied from 0.5 to 50 wt. % and 25 to 500 nm, respectively, through proper control of raw materials and reactor conditions. To determine how the nanophase SiC reinforcement affects the mechanical properties of Si3N4, densified components were fabricated using both pressureless and pressure‐assisted densification methods. TEM analysis revealed that the nanophase SiC particles are distributed both intergranularly and intragranularly throughout the Si3N4, matrix. By controlling the sintering additive package and the sintering conditions, the ratio of inter– to intragranular SiC can be adjusted. Mechanical property measurements at elevated temperatures showed a dramatic improvement in high‐temperature strength and creep resistance over components made with commercially available powders.

Calculated influences of starting materials composition on carbothermal nitridation synthesis of silicon nitride/silicon carbide composite powders

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

Synthesis of TiN-Si3N4 Composites from Rutile and Quartz by Carbothermal Reduction Nitridation

Thermogravimetry, Differential Thermal Analysis, And Mass Spectrometry Study Of The Silicon Nitride-Boron Carbide-Carbon Reaction System For The Synthesis Of Silicon Carbide-Boron Nitride Composites

Synthesis of Si<sub>3</sub>N<sub>4</sub>-TiN-SiC Composites by Combustion Reaction under High Nitrogen Pressures

Synthesis of Si<sub>3</sub>N<sub>4</sub>-TiN-SiC Composites by Combustion Reaction under High Nitrogen Pressures

Effect of nitrogen pressure on combustion synthesis of Si3N4-SiC-TiN ceramic

Synthesis of β-Si3N4 powder from quartz via carbothermal reduction nitridation

Synthesis of Si3N4–TiN–SiC Composites by Combustion Reaction under High Nitrogen Pressures

Effect of β-Si<sub>3</sub>N<sub>4</sub> Powder on Thermal Conductivity of Silicon Nitride Ceramics

Synthesis of Si 3 N 4 powder with tunable α/β-Si 3 N 4 content from waste silica fume using carbothermal reduction nitridation

Synthesis of ZrN–Si3N4 composite powders from zircon and quartz by carbothermal reduction and nitridation

Influence of Temperature on Phase Composition of Nitridation Products from Ferrosilicon Alloy

Effect of the Diluent on Combustion Synthesis of Silicon Nitride

Preparation of Si3N4–TiN–SiC composite by partial substitution of Ti–Si–Fe alloy for Si under N2 atmosphere

Synthesis of monodisperse and high-purity α-Si3N4 powder by carbothermal reduction and nitridation

Preheating-assisted Combustion Synthesis of Β-Si3n4 Powders at Low N2 Pressure

Study on the Combustion Synthesis of Si3N4-SiC-TiN Ceramics

Carbothermally prepared nanophase SiC/ Si3N4 composite powders and densified parts

The Effect of Diluent on Combustion Synthesis of Si3n4-Sic-Tin Ceramics with Small Diameter

Effect of Initial Phase Composition on the Phase Composition, Microstructure, and Mechanical Properties of Si3N4 Ceramics

Calculated influences of starting materials composition on carbothermal nitridation synthesis of silicon nitride/silicon carbide composite powders

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

Synthesis of TiN-Si3N4 Composites from Rutile and Quartz by Carbothermal Reduction Nitridation

Thermogravimetry, Differential Thermal Analysis, And Mass Spectrometry Study Of The Silicon Nitride-Boron Carbide-Carbon Reaction System For The Synthesis Of Silicon Carbide-Boron Nitride Composites

Synthesis of Si&lt;sub&gt;3&lt;/sub&gt;N&lt;sub&gt;4&lt;/sub&gt;-TiN-SiC Composites by Combustion Reaction under High Nitrogen Pressures

Synthesis of Si<sub>3</sub>N<sub>4</sub>-TiN-SiC Composites by Combustion Reaction under High Nitrogen Pressures

Effect of nitrogen pressure on combustion synthesis of Si3N4-SiC-TiN ceramic

Synthesis of β-Si3N4 powder from quartz via carbothermal reduction nitridation

Synthesis of Si3N4–TiN–SiC Composites by Combustion Reaction under High Nitrogen Pressures

Effect of β-Si<sub>3</sub>N<sub>4</sub> Powder on Thermal Conductivity of Silicon Nitride Ceramics

Synthesis of Si 3 N 4 powder with tunable α/β-Si 3 N 4 content from waste silica fume using carbothermal reduction nitridation

Synthesis of ZrN–Si3N4 composite powders from zircon and quartz by carbothermal reduction and nitridation

Influence of Temperature on Phase Composition of Nitridation Products from Ferrosilicon Alloy

Effect of the Diluent on Combustion Synthesis of Silicon Nitride

Preparation of Si3N4–TiN–SiC composite by partial substitution of Ti–Si–Fe alloy for Si under N2 atmosphere

Synthesis of monodisperse and high-purity α-Si3N4 powder by carbothermal reduction and nitridation

Preheating-assisted Combustion Synthesis of Β-Si3n4 Powders at Low N2 Pressure

Study on the Combustion Synthesis of Si3N4-SiC-TiN Ceramics

Carbothermally prepared nanophase SiC/ Si3N4 composite powders and densified parts

The Effect of Diluent on Combustion Synthesis of Si3n4-Sic-Tin Ceramics with Small Diameter

Effect of Initial Phase Composition on the Phase Composition, Microstructure, and Mechanical Properties of Si3N4 Ceramics

Synthesis of Si<sub>3</sub>N<sub>4</sub>-TiN-SiC Composites by Combustion Reaction under High Nitrogen Pressures