Abstract:: Sulfate minerals are widely distributed in nature, and their sulfur isotopic signatures offer a largely untapped source of potential information for improving our understanding of magmatic, hydrothermal, and sedimentary processes. In this study, we describe an analytical procedure for measuring the sulfur isotopic compositions of natural sulfate-bearing samples using a LA-MC-ICP-MS (laser ablation multiple collector inductively coupled plasma mass spectrometry) technique. YF-2 barite (BaSO 4 ) from the Yongfu hydrothermal deposit yields a δ 34 S value of 18.1 ± 0.4‰ (n = 11, 2SD), obtained by elemental analyzer-isotope ratio mass spectrometry (EA-IRMS), and has been adopted as the reference material for sulfur isotopic determination in this study. The sulfur isotopic ratios for NBS 127 and IAEA-SO-5 barium sulfate are validated by using YF-2 pressed powder tablets as the internal reference standard, and this analytical protocol yielded results that overlap with recommended values. The δ 34 S values obtained here for the YF-1, GTS, and DGD barites are similar to those recorded by EA-IRMS for these samples. WC barite displays highly variable sulfur isotopic compositions, although the average δ 34 S value for WC barite is similar to that obtained by EA-IRMS. Sulfates in the barite-celestine solid solution series and anhydrite were analyzed to determine the isotopic fractionation in varied matrices using both the RESOlution and GeoLasHD laser ablation systems. The analytical results suggest minimal sulfur isotopic fractionation between barite and other S-bearing matrices using both laser systems. For non-matrix matched sulfur isotope analysis, the ion signal intensity and laser parameters are important parameters that must be closely monitored. If sulfur isotopic fractionation is observed during sample ablation, this feature can be minimized by employing a smaller beam size, lower repetition rate and fluence output.

Discussion on spectrometry of barium sulfate content in negative active materials

Determination of barium content in barium carbonate used for fireworks and firecrackers based on Energy Dispersive X-ray Fluorescence Spectrometry (EDXRF)

[Results of urinary control analyses of narcotic addicts on methadone therapy. An evaluation in the county of ]rhus in 1993].

[Electron microscopic study on the Fuch's dystrophy].

Determination of Bismuth in Solid Samples by Hydride Generation Atomic Fluorescence Spectrometry with a Dielectric Barrier Discharge Atomizer

Determination of Bismuth in Sediment and Soil by Ultrasonic Slurry Sampling Electrothermal Atomic Absorption Spectrometry

Antimony Speciation Analysis in Angelica by Ion Chromatography-Bianode Electrochemical Hydride Generation-Atomic Fluorescence Spectrometric Detection

Elimination Of The Spectral Interference From Barium Polyatomic Ions On Rare Earth Elements In Inductively Coupled Plasma Mass Spectrometry By Ag50w-X8 Cation Exchange Chromatographic Separation

Study on the Method of Nanometer-Size Zirconium Dioxide Enrichment Separation and Inductively Coupled Plasma Mass Spectrometry Determination of Trace Barium(Ii) in Water

In-Situ Sulfur Isotopic Analysis of Sulfate by Laser Ablation Multiple Collector Inductively Coupled Plasma Mass Spectrometry (LA-MC-ICP-MS)

Applying standard addition to determine antimony isotopes in low-Sb samples using HG-MC-ICP-MS

Comparison of masking agents for antimony speciation analysis using hydride generation atomic fluorescence spectrometry

Study on Elimination of Barium in Extract from Bubali Cornu

A New Method For Antimony Speciation In Plant Biomass And Nutrient Media Using Anion Exchange Cartridge

Elemental Imaging Method Based on a Dielectric Barrier Discharge Probe Coupled with Inductively Coupled Plasma Mass Spectrometry

Elimination of the Spectral Interference from Polyatomic Ions with Rare Earth Elements in Inductively Coupled Plasma Mass Spectrometry by Combining Algebraic Correction with Chromatographic Separation

Cloud point extraction combined with electrothermal atomic absorption spectrometry for the speciation of antimony(III) and antimony(V) in food packaging materials

Direct and Sensitive Determination of Antimony in Water by Hydrogen-Doped Solution Anode Glow Discharge-Optical Emission Spectrometry Without Hydride Generation

An apparatus to manipulate and identify individual Ba ions from bulk liquid Xe

Determination of bismuth in river sediment by electrothermal atomic absorption spectrometry with low-temperature atomization in argon/hydrogen

Studies of barium density in cathode region of fluorescent lamp by emission spectroscopy