Abstract:Stable isotopes of cerium (Ce) and neodymium (Nd), two rare earth elements (REEs), have emerged recently as useful tracers for a range of geological and environmental processes, such as redox changes in environments or continental weathering. However, the coupled use of stable isotopes of two (or more) rare earth elements is often hampered by difficulties in sequential separation of individual REEs and analysis of their stable isotope ratios at high precision. Here, we report a new three-stage chromatographic procedure that allows for simultaneous separation of Ce and Nd from geological samples for high-precision analysis of their stable isotope ratios on MC-ICP-MS. This approach also allows for analysis of radiogenic 143 Nd/ 144 Nd ratios at high precision. Sequential separation of Nd and Ce in our procedure was achieved and optimized using α-hydroxyisobutyric acid (α-HIBA) as an eluent. Possible Ce and Nd stable isotope fractionations induced by the α-HIBA column were quantified. Total procedural blanks of our three-stage separation are low for Ce (∼46 pg) and Nd (∼2 pg). Extensive tests were conducted on MC-ICP-MS under dry plasma conditions to evaluate matrix effects associated with common cationic impurities, acid concentration, analyte/dopant ratio, and concentration mismatch between the sample and the bracketing standards. The presence of α-HIBA, and, occasionally, aluminum (Al) can affect measurements of both stable Ce and Nd isotopes, and acid concentration mismatch may affect stable Nd isotope measurements. An iterative correction method was developed to considerably increase the tolerance of stable Ce isotope analysis to Nd isobaric interferences, thereby improving the robustness of our measurement. Based on the analysis of various reference materials, we demonstrate that our new method is suitable for routine high-precision stable Ce and Nd isotope measurements on geological samples with a wide range of matrix compositions, yielding a long-term precision of ≤0.04‰ (2SD) for 142 Ce/ 140 Ce and ≤0.03‰ (2SD) for 146 Nd/ 144 Nd. This method also permits accurate radiogenic 143 Nd/ 144 Nd measurement with an external precision of ≤15 ppm (2SD). Because the α-HIBA column is known for its capability of separating individual REEs, our approach can be adapted to separate other REEs for high-precision stable and radiogenic isotope analysis with minor modifications.

Elimination of the Spectral Interference from Polyatomic Ions with Rare Earth Elements in Inductively Coupled Plasma Mass Spectrometry by Combining Algebraic Correction with Chromatographic Separation

Elimination Of The Spectral Interference From Barium Polyatomic Ions On Rare Earth Elements In Inductively Coupled Plasma Mass Spectrometry By Ag50w-X8 Cation Exchange Chromatographic Separation

Determination of 14 trace rare earth impurities in high-purity CeO2 by inductively coupled plasma mass spectrometry with membrane desolvation

Inductively Coupled Plasma Optical Emission Spectrometry for Rare Earth Elements Analysis

Simultaneous Determination of Rare Earth Elements in Aqueous Samples by Online Preconcentration System and Inductively Coupled Plasma Mass Spectrometry

ICP-AES Determination of Trace Rare Earth Elements in Environmental and Food Samples by On-Line Separation and Preconcentration with Acetylacetone-Modified Silica Gel Using Microcolumn.

Dual dispersive extraction combined with electrothermal vaporization inductively coupled plasma mass spectrometry for determination of trace REEs in water and sediment samples

Removal of High-Salinity Matrices Through Polymer-Complexation–ultrafiltration for the Detection of Trace Levels of REEs Using Inductively Coupled Plasma Mass Spectrometry

Sequential separation of cerium (Ce) and neodymium (Nd) in geological samples for high-precision analysis of stable Ce isotopes, and stable and radiogenic Nd isotopes by MC-ICP-MS

ICP-MS direct determination of trace amounts of rare earth impurities in various rare earth oxides with only one standard series

Cloud point extraction with/without chelating agent on-line coupled with inductively coupled plasma optical emission spectrometry for the determination of trace rare earth elements in biological samples.

Determination Of Trace Rare Earth Elements In Soils By Inductively Coupled Plasma-Mass Spectrometry After Microwave Digestion For Sample Preparation

Determination of Rare Earth Elements in Geological Samples by Inductively Coupled Plasma Atomic Emission Spectrometry with Flow Injection Liquid-Liquid Extraction

Chelation-assisted electrothermal vaporization for the ICP-MS determination of trace rare earth impurities in high purity Pr6O11 and Er2O3

Micro-sampling, high sensitivity ETV-ICP-MS method for the determination of trace rare earth impurities in high purity lanthanum oxide

Determination of Trace Rare Earth Elements in Environmental Samples by Low Temperature Electrothermal Vaporization Inductively Coupled Plasma Mass Spectrometry after Synergistic Extraction with Dimethylheptyl Methyl Phosphate and 1-Phenyl-3-methyl-4-benzoyl-pyrazalone-5.

Multielemental Determination of Rare Earth Elements in Seawater by Inductively Coupled Plasma Mass Spectrometry (ICP-MS) After Matrix Separation and Pre-concentration With Crab Shell Particles

Flow Injection On-Line Solid Phase Extraction Coupled with Inductively Coupled Plasma Mass Spectrometry for Determination of (ultra)trace Rare Earth Elements in Environmental Materials Using Maleic Acid Grafted Polytetrafluoroethylene Fibers As Sorbent

Determination of Rare Earth Impurities in High-purity Lanthanum Oxide Using Electrothermal Vaporization/ICP-AES after HPLC Separation

Determination of light rare earth elements by inductively coupled plasma atomic emission spectrometry

High-yield Sample Introduction Using Nebulized Film Dielectric Barrier Discharge Assisted Chelate Vapor Generation for Trace Rare Earth Elements Determination by Inductively Coupled Plasma Mass Spectrometry