Abstract:Background: Some heavy metals could be ingested into human body through breathing besides diet and drinking. Atmospheric particulates and smoke are main sources of this kind for the metals' exposure to human. Compared with environmental water, the methodologies for trace metals in particulates and smoke samples with more complex matrix are much less. Magnetic functional sorbents can be designed to remove complex matrix and enrich target analytes. The combination of magnetic solid phase extraction (MSPE) with highly sensitive inductively coupled plasma mass spectrometry (ICP-MS) detection is a good alternative for the analytical purpose. (92). Results: Magnetic polymers were synthesized through free radical polymerization with Fe3O4 nanoparticles as the core and 2-methyl-2-hydroxyethyl 2-acrylate-2-hydroxyethyl ester phosphate as external modifier. The sorbent showed a high phosphorus content (2.7 wt%) and good selectivity to target REEs, along with good reusability (at least 45 times) and chemical stability. With the consumption of 150 mL aqueous solution, an enrichment factor of 300 was obtained by the proposed method, leading to low detection limits (0.001-0.2 ng L-1) for 15 REEs. The application potential of the method was further evaluated by analyzing local atmospheric particulate and cigar smoke samples. Recovery of 86.3-107 % in digested total suspended particulate (TSP) was obtained for 15 REEs, demonstrating a good anti-interference ability of the method. Target REEs in TSP, PM2.5 and PM10 samples were found to be 0.01-2.81, 0.006-1.09 and 0.009-2.46 ng m-3, respectively, and none of them were detected in the collected cigar smoke. (148) SIGNIFICANCE: The method of MSPE-ICP-MS was demonstrated with good potential for trace analysis in complex sample matrix, probably due to the good selectivity of the functionalized polymers. With the design and fabrication of specific functionalized magnetic sorbents, other heavy metals can be monitored in those samples which would be intake by human breathing. It provided an efficient strategy for the evaluation of metals' health risk in particulates and smoke samples. (69).

Phosphonic Acid-Functionalized MIL-53(Al) As an Efficient Sorbent for Trace Rare Earth Elements Preconcentration, Storage and Their Determination by X-ray Fluorescence Spectrometry

Preparation of a Novel Macroporous Silica-Based 2,6-Bis(5,6-diisobutyl-1,2,4-triazine-3-yl)pyridine Impregnated Polymeric Composite and Its Application in the Adsorption for Trivalent Rare Earths

Efficient Separation of Th(IV) from Highly Acidic Solution by Microporous Resin Materials Containing Two Novel Phenanthroline Phosphonates

Flow Injection On-Line Solid Phase Extraction Coupled with Inductively Coupled Plasma Mass Spectrometry for Determination of (ultra)trace Rare Earth Elements in Environmental Materials Using Maleic Acid Grafted Polytetrafluoroethylene Fibers As Sorbent

Highly Efficient and Selective Recovery of Rare Earth Elements Using Mesoporous Silica Functionalized by Preorganized Chelating Ligands

Efficient Recovery of Rare Earth Elements (Pr(III) and Tm(III)) From Mining Residues Using a New Phosphorylated Hydrogel (Algal Biomass/PEI)

Phosphonate functionalized magnetic mesoporous silica for rare earth element recovery from citrate assisted solid waste extracts

Trace rare earth elements analysis in atmospheric particulates and cigar smoke by ICP-MS after pretreatment with magnetic polymers

Preparation of A Novel Macroporous Silica-Based Diglycolamide Derivative-Impregnated Polymeric Composite and Its Adsorption Mechanism for Rare Earth Metal Ions

Size-Selective Separation of Rare Earth Elements Using Functionalized Mesoporous Silica Materials

Selective Adsorption of Rare Earth Elements over Functionalized Cr-MIL-101

Pretreatment by Recyclable Fe3O4@Mg/Al-CO3-LDH Magnetic Nano-Adsorbent to Dephosphorize for the Determination of Trace F− and Cl− in Phosphorus-Rich Solutions

Multistep pH-peak-focusing liquid chromatography with a hydrophilic polymer gel column for separation of rare earth elements

Overview of Functionalized Porous Materials for Rare-Earth Element Separation and Recovery

Phosphorylated porous phenolic resin for efficient extraction of low-concentration rare earth elements from tailing wastewater

3D-agaric like core-shell architecture UiO-66-NH2@ZIF-8 with robust stability for highly efficient REEs recovery

Understanding the Adsorption of Rare-Earth Elements in Oligo-Grafted Mesoporous Carbon

Phosphomethylated Polyethyleneimine-immobilized Chelating Resin: Role of Phosphomethylation Rate on Solid-Phase Extraction of Trace Elements

Preconcentration of Pb(II) by Magnetic Metal-Organic Frameworks and Analysis Using Graphite Furnace Atomic Absorption Spectroscopy

Preparation of pyrrolidinyl diglycolamide bonded silica particles and its rare earth separation properties

Magnetic Adsorbent Decorated with Poly(N-Isopropylacrylamide) (PNIPAM) Brushes for the Vortex-Assisted Solid Phase Extraction (VASPE) of Lead in Water, Cigarettes and Soil with High-Resolution Continuum Source Flame Atomic Absorption Spectrometry (HR-CS FAAS) Detection