Abstract:A new magnetic IIP was synthesized to develop an environmentally benign SPE coupled FAAS method for preconcentration, trace determination and removal of the persistent, bio‐accumulative, toxic contaminant of emerging concern; Ni(II). The method was optimized using RSM‐CCD and ANN. Apart from regeneration Ni(II) loaded IIP was exploited for reduction of permanganate ions, further reducing pollution. In order to study transportation and biomagnification of Ni(II) trace‐determination, and removal of Ni(II) was performed in ground water, wastewater, and food samples. A novel silica fabricated allyloxy ethanol based imprinted polymer is synthesised with surface area of 333 m2 g−1 and average pore size of 6.5 nm by an environment friendly one pot surface imprinting process. It was employed for the selective solid‐phase extraction (SPE) of trace Ni(II) in real samples prior to FAAS determination. The factor settings produced via central composite design in response surface methodology (RSM) (pH: 3.6; initial concentration; 800 mg L−1 and time; 15 minute) provide adsorption capacity of 176 mg g−1. Artificial neural network model employed on the RSM data, provided better predictability. Sips isotherm model and BSf kinetic model describes best the sorption phenomena of the homogenous binding terrain. The developed SPE‐coupled FAAS method demonstrate a detection limit of 1.62 μg L−1, quantification limit of 4.17 μg L−1, and Linear dynamic range of 20–8000 μg L−1. It was successfully applied to determine nickel in food (Spinach, Radish, Green tea infusion, Black tea infusion, Coffee, Soya milk, Chocolate Soya milk, Tobacco) and wastewater samples (>99 % removal). For five replicate determinations, the method's relative standard deviation was 2.3 %. The method was validated by analysing two certified reference materials, and the outcomes were well‐congruent with standard values. For the synthesised polymer Ni(II) exhibits higher distribution ratio than other competing ions (Cu(II), Pb(II), Cd(II), and Zn(II)) with the imprinting factor; β values of 5.73, 4.98, 6.80, and 5.04 respectively. The reusability experiments revealed that APS@Ni‐IIP retains a strong adsorption efficacy even after 15 cycles and after its exhaustion it was employed as catalyst for reducing permanganate ions, further reducing pollution. The rigid structure of mesoporous silica contributes to its acid resilience and reusability, which can lead to a relative increase in polymer performance in absorption rate and selectivity. Apart from the novelty in the synthesis, thorough examination of the method and material selectivity (in binary, ternary and multielement system), multi fold applications of determination, removal of Ni(II) and reduction of permanganate ions, makes APS@Ni‐IIP a promising candidate for environmental remediation.

Magnetic Adsorbent Decorated with Poly(N-Isopropylacrylamide) (PNIPAM) Brushes for the Vortex-Assisted Solid Phase Extraction (VASPE) of Lead in Water, Cigarettes and Soil with High-Resolution Continuum Source Flame Atomic Absorption Spectrometry (HR-CS FAAS) Detection

Extraction and preconcentration of lead (II) in various water and food samples by orbital shaker-assisted magnetic solid phase extraction method using a new magnetic poly linoleic acid-polystyrene-PDMS block copolymer

Magnetic Porous Ion Imprinted Polymer Based on Surface Polymerization and Nano-ZnO as Sacrificial Support for Selective Extraction and determination of Pb (II) in Water Samples and Cosmetics

Simple Magnetic Polymeric Ionic Liquid Nanocomposite Coated Hollow Fiber Membrane for the Determination of Lead (II) and Copper (II) in Water and Fruit Juice with Microinjection Sampling-Flame Atomic Absorption Spectrometry (MIS-FAAS)

Synthesis of magnetic multi-walled carbon nanotubes with layered double hydroxide (M-MWCNTs@MnAl-LDH) nanocomposite as an adsorbent for lead extraction

Preparation of C 18 -functionalized magnetic polydopamine microspheres for the enrichment and analysis of alkylphenols in water samples

Facile and rapid preparation of magnetic octadecylamine nanocomposite and its application as a capable adsorbent in magnetic dispersive solid phase extraction of some polycyclic aromatic hydrocarbons from wastewater samples

Ionic liquid-linked dual magnetic microextraction of lead(II) from environmental samples prior to its micro-sampling flame atomic absorption spectrometric determination

Facile green synthesis of magnetic porous organic polymers for fast preconcentration of trace lead and mercury from environmental water followed by graphite furnace atomic absorption spectrometry detection

Magnetic microsphere-based portable solid phase extraction device for on-site pre-concentration of organics from large-volume water samples

Facile construction of magnetic solid-phase extraction of polyaniline blend poly(amidoamine) dendrimers modified graphene oxide quantum dots for efficient adsorption of polycyclic aromatic hydrocarbons in environmental water

The extraction of polycyclic aromatic hydrocarbons from water samples with aromatic-dithiocarbamate modified magnetic nanoparticles

A Magnetized Nanoparticle Based Solid-Phase Extraction Procedure Followed by Inductively Coupled Plasma Atomic Emission Spectrometry to Determine Arsenic, Lead and Cadmium in Water, Milk, Indian Rice and Red Tea

Application of magnetic nanoparticles coated with sodium dodecyl sulfate and modified with 2-(5-bromo-2-pyridylazo)-5-diethyl aminophenol as a novel adsorbent for dispersive-magnetic solid-phase extraction and determination of palladium in soil samples

Fe3O4@SiO2@VAN Nanoadsorbent Followed by GC-MS for the Determination of Polycyclic Aromatic Hydrocarbons at Ultra-Trace Levels in Environmental Water Samples

Determination of 16 Phthalate Acid Esters in Water Samples by Magnetic Solid Phase Extraction/Gas Chromatography- Mass Spectrometry

Magnetic surface-imprinted polymer microspheres coupled with HPLC-MS/MS for sensitive detection of amphetamine-type drugs in water

Functionalized nanodiamonds with NiCoFe layered double hydroxides used as a novel adsorbent in dispersive solid phase microextraction for Pb(II) determination in juice samples

Silica Grafted Imprinted Mesoporous Polymer for the Development of SPE Coupled FAAS Method of Nickel Determination, Removal, and Spent Polymer for Reduction of Permanganate: Multivariate Optimization

Microwave-assisted synthesis of magnetic surface molecular imprinted polymer for adsorption and solid phase extraction of 4-nitrophenol in wastewater

Facile fabrication of naphthalene-functionalized magnetic nanoparticles for efficient extraction of polycyclic aromatic hydrocarbons from environmental water and fish samples