Abstract:At present, in-situ leaching of weathered crust elution-deposited rare earth ores (WCE-DREO) encounter with problems such as long leaching cycles, slow infiltration rate and low product purity. In order to solve the above problems, the conventional leaching agent ammonium sulfate ((NH4)2SO4) was compounded with polymeric surfactant polyethyleneimine (PEI) to form a composite leaching agent. The effects of leaching temperature, PEI concentration, flow rate and pH on leaching kinetics and permeability of rare earths (RE) and aluminum (Al) in orebody were studied. The following results were concluded: with temperature increase, the time required to reach leaching equilibrium for both RE and Al were shortened, the apparent activation energies of RE and Al were 14.79 kJ/mol and 13.45 kJ/mol, respectively, and the leaching processes were in accordance with the outer diffusion control. When the concentrations of (NH4)2SO4 and PEI in the composite leaching agent were 2.0 wt% and 0.4 wt%, the time required to reach leaching equilibrium for RE and Al was about 50% shorter than using (NH4)2SO4 alone, and the leaching efficiencies of RE were slightly higher than that of Al. Properly increasing the temperature and flow rate of the composite leaching agent could improve the leaching efficiencies of RE and Al, but pH had neglected effects on the leaching efficiencies of RE. At PEI concentrations below 0.4 wt%, the addition of PEI promoted the leaching of RE and Al. In column leaching studies of the WCE-DREO, the addition of 0.4 wt% PEI to the traditional leaching agent (NH4)2SO4) had no impact on the leaching efficiencies of RE. However, it could significantly increase the infiltration rate of WCE-DREO, shortening the leaching time per 10 mL effluent from about 30 min for (NH4)2SO4 leaching system to 20 min for the composite leaching system. The leaching time was shortened by one-third, and the leaching costs was reduced, which could provide theoretical guidance for the development and commercial implementation of novel composite leaching agent for WCE-DREO.

Phosphomethylated Polyethyleneimine-immobilized Chelating Resin: Role of Phosphomethylation Rate on Solid-Phase Extraction of Trace Elements

Properties and Mechanism of Molybdenum and Zirconium Adsorption by a Macroporous Silica‐Based Extraction Resin in the MAREC Process

Leakage of Octyl(Phenyl)-N,N-Di-Isobutylcarbamoylmethylphosphine Oxide from a Macroporous Silica-Based Chelating Polymeric Adsorption Material and Its Recovery by Some Selected Porous Adsorbents

Synthesis and Application of A Macroporous Silica-Based Polymeric Octyl(Phenyl)-N,N-Diisobutylcarbamoylmethylphoshine Oxide Composite for the Chromatographic Separation of High Level Liquid Waste

Preparation of a Novel Macroporous Silica-Based 2,6-Bis(5,6-diisobutyl-1,2,4-triazine-3-yl)pyridine Impregnated Polymeric Composite and Its Application in the Adsorption for Trivalent Rare Earths

Preparation of A Novel Macroporous Silica-Based Diglycolamide Derivative-Impregnated Polymeric Composite and Its Adsorption Mechanism for Rare Earth Metal Ions

Leaching kinetics and permeability of polyethyleneimine added ammonium sulfate on weathered crust elution-deposited rare earth ores

Efficient Recovery of Rare Earth Elements (Pr(III) and Tm(III)) From Mining Residues Using a New Phosphorylated Hydrogel (Algal Biomass/PEI)

Phosphonic Acid-Functionalized MIL-53(Al) As an Efficient Sorbent for Trace Rare Earth Elements Preconcentration, Storage and Their Determination by X-ray Fluorescence Spectrometry

Phosphorylated porous phenolic resin for efficient extraction of low-concentration rare earth elements from tailing wastewater

Application of a Macroporous Silica-Based CMPO-Impregnated Polymeric Composite in Group Partitioning of Long-Lived Minor Actinides from Highly Active Liquid by Extraction Chromatography

New Insights on Y, La, Nd, and Sm Extraction with Bifunctional Ionic Liquid Cyphos IL 104 Incorporated in a Polymer Inclusion Membrane

Highly Efficient and Selective Recovery of Rare Earth Elements Using Mesoporous Silica Functionalized by Preorganized Chelating Ligands

Onsite chelate resin solid-phase extraction of rare earth elements in natural water samples: its implication for studying past redox changes by inorganic geochemistry

Flow Injection On-Line Solid Phase Extraction Coupled with Inductively Coupled Plasma Mass Spectrometry for Determination of (ultra)trace Rare Earth Elements in Environmental Materials Using Maleic Acid Grafted Polytetrafluoroethylene Fibers As Sorbent

A polyethyleneimine-modified attapulgite as a novel solid support in matrix solid-phase dispersion for the extraction of cadmium traces in seafood products

Solid-phase extraction of palladium, platinum, and gold from water samples: comparison between a chelating resin and a chelating fiber with ethylenediamine groups

Extractant (2,3-Dimethylbutyl)(2,4,4′-trimethylpentyl)phosphinic Acid (INET-3) Impregnated Onto XAD-16 and Its Extraction and Separation Performance for Heavy Rare Earths from Chloride Media

Study on Separation of Rhenium, a Surrogate Element of Fissiogenic Technetium, from Aqueous Matrices Using Ion-Selective Extraction Chromatographic Resins

Solvent Extraction and Separation of Heavy Rare Earths from Chloride Media Using Nonsymmetric (2,3-Dimethylbutyl)(2,4,4′-trimethylpentyl)phosphinic Acid

Phosphonate functionalized magnetic mesoporous silica for rare earth element recovery from citrate assisted solid waste extracts