Abstract:Stable isotopes of cerium (Ce) and neodymium (Nd), two rare earth elements (REEs), have emerged recently as useful tracers for a range of geological and environmental processes, such as redox changes in environments or continental weathering. However, the coupled use of stable isotopes of two (or more) rare earth elements is often hampered by difficulties in sequential separation of individual REEs and analysis of their stable isotope ratios at high precision. Here, we report a new three-stage chromatographic procedure that allows for simultaneous separation of Ce and Nd from geological samples for high-precision analysis of their stable isotope ratios on MC-ICP-MS. This approach also allows for analysis of radiogenic 143 Nd/ 144 Nd ratios at high precision. Sequential separation of Nd and Ce in our procedure was achieved and optimized using α-hydroxyisobutyric acid (α-HIBA) as an eluent. Possible Ce and Nd stable isotope fractionations induced by the α-HIBA column were quantified. Total procedural blanks of our three-stage separation are low for Ce (∼46 pg) and Nd (∼2 pg). Extensive tests were conducted on MC-ICP-MS under dry plasma conditions to evaluate matrix effects associated with common cationic impurities, acid concentration, analyte/dopant ratio, and concentration mismatch between the sample and the bracketing standards. The presence of α-HIBA, and, occasionally, aluminum (Al) can affect measurements of both stable Ce and Nd isotopes, and acid concentration mismatch may affect stable Nd isotope measurements. An iterative correction method was developed to considerably increase the tolerance of stable Ce isotope analysis to Nd isobaric interferences, thereby improving the robustness of our measurement. Based on the analysis of various reference materials, we demonstrate that our new method is suitable for routine high-precision stable Ce and Nd isotope measurements on geological samples with a wide range of matrix compositions, yielding a long-term precision of ≤0.04‰ (2SD) for 142 Ce/ 140 Ce and ≤0.03‰ (2SD) for 146 Nd/ 144 Nd. This method also permits accurate radiogenic 143 Nd/ 144 Nd measurement with an external precision of ≤15 ppm (2SD). Because the α-HIBA column is known for its capability of separating individual REEs, our approach can be adapted to separate other REEs for high-precision stable and radiogenic isotope analysis with minor modifications.

Elimination Of The Spectral Interference From Barium Polyatomic Ions On Rare Earth Elements In Inductively Coupled Plasma Mass Spectrometry By Ag50w-X8 Cation Exchange Chromatographic Separation

Elimination of the Spectral Interference from Polyatomic Ions with Rare Earth Elements in Inductively Coupled Plasma Mass Spectrometry by Combining Algebraic Correction with Chromatographic Separation

Preparation of a Novel Macroporous Silica-Based 2,6-Bis(5,6-diisobutyl-1,2,4-triazine-3-yl)pyridine Impregnated Polymeric Composite and Its Application in the Adsorption for Trivalent Rare Earths

Development of a new simultaneous separation of cesium and strontium by extraction chromatograph utilization of a hybridized macroporous silica-based functional material

SPEC: A New Process for Strontium and Cesium Partitioning Utilizing Two Macroporous Silica-Based Supramolecular Recognition Agents Impregnated Polymeric Composites

Development of the chromatographic partitioning of cesium and strontium utilizing two macroporous silica-based calix[4]arene-crown and amide impregnated polymeric composites: PREC partitioning process.

Determination of 14 trace rare earth impurities in high-purity CeO2 by inductively coupled plasma mass spectrometry with membrane desolvation

Flow Injection On-Line Solid Phase Extraction Coupled with Inductively Coupled Plasma Mass Spectrometry for Determination of (ultra)trace Rare Earth Elements in Environmental Materials Using Maleic Acid Grafted Polytetrafluoroethylene Fibers As Sorbent

Establishing carbon dots assisted high speed countercurrent chromatography and its application for efficient separation of rare earth element ions

Chromatographic Separation of Strontium (II) from a Nitric Acid Solution Containing Some Typically Simulated Elements by a Novel Silica‐Based TODGA Impregnated Polymeric Composite in the MAREC Process

Sequential separation of cerium (Ce) and neodymium (Nd) in geological samples for high-precision analysis of stable Ce isotopes, and stable and radiogenic Nd isotopes by MC-ICP-MS

Multielemental Determination of Rare Earth Elements in Seawater by Inductively Coupled Plasma Mass Spectrometry (ICP-MS) After Matrix Separation and Pre-concentration With Crab Shell Particles

Ce and Nd stable isotopes purification and determination of geological samples by MC-ICP-MS

Solvent Extraction and Separation of Heavy Rare Earths from Chloride Media Using Nonsymmetric (2,3-Dimethylbutyl)(2,4,4′-trimethylpentyl)phosphinic Acid

Solid-phase extraction and separation of heavy rare earths from chloride media using P227-impregnated resins

Onsite chelate resin solid-phase extraction of rare earth elements in natural water samples: its implication for studying past redox changes by inorganic geochemistry

Phosphonic Acid-Functionalized MIL-53(Al) As an Efficient Sorbent for Trace Rare Earth Elements Preconcentration, Storage and Their Determination by X-ray Fluorescence Spectrometry

An innovative technique for the separation of ion-adsorption high yttrium rare earth ore by Er (III) / Tm (III) grouping first

Determination Of Trace Rare Earth Elements In Soils By Inductively Coupled Plasma-Mass Spectrometry After Microwave Digestion For Sample Preparation

Extractant (2,3-Dimethylbutyl)(2,4,4′-trimethylpentyl)phosphinic Acid (INET-3) Impregnated Onto XAD-16 and Its Extraction and Separation Performance for Heavy Rare Earths from Chloride Media

A single column separation method for barium isotope analysis of geologic and hydrologic materials with complex matrices